Cooling - Air

PC components produce a lot of waste heat, and without a sufficient cooling will overheat, shutting down or damaging your system. It’s critical therefore to choose an appropriate cooler.

The last thing to bear in mind when choosing a CPU, GPU or SSD cooler is Thermal Interface Material (TIM). This is a thin layer of paste that you spread out between the top of the component and the bottom of the heatsink or waterblock. TIM helps conduct heat out of the CPU by smoothing out imperfections in the surface on either side and is essential for good cooling.

Many coolers come with TIM pre-applied or packaged in a small syringe for you to apply, but it's worth checking before ordering. You can check for the presence of TIM on the product page of the cooler on the Scan website and clicking on the Specifications tab.

PC components produce a lot of waste heat, and without sufficient cooling will overheat, shutting down or damaging your system. It’s critical therefore to choose an appropriate cooler.

The last thing to bear in mind when choosing a cooler is Thermal Interface Material (TIM). TIM helps conduct heat out of the CPU, GPU or RAM into the cooler by smoothing out imperfections in the surface on either side and is essential for good cooling.

These particular thermal pads are an alternative to liquid form of TIM most commonly used with CPU coolers. Thermal pads are pre-cut to be compatible with specific compnents such as GPUs and graphics card VRAM, so make sure to choose the right size pads for your components.

PC components produce a lot of waste heat, and without a sufficient cooler will overheat, shutting down or damaging your system. It’s critical therefore to choose an appropriate CPU cooler.

The products in this category provide a quick and easy way to remove unwanted Thermal Interface Material (TIM) without damaging your components. This may be because you're upgrading and need to replenish the TIM or want to replace the current TIM with a superior TIM.