Cooling - Air

AMD and Intel CPUs produce a lot of waste heat, and without a sufficient cooler will overheat, shutting down or damaging your system. It’s critical therefore to choose an appropriate CPU cooler.

This category contains a huge variety of all-in-one hydrocoolers for AMD and Intel CPUs. These coolers combine a waterblock, pump, tubing, radiator, fans and coolant into a single, sealed unit that's simple to install and doesn't require maintenance or filling. These particular hydrocoolers attach to a pair of free 120mm fan mounts in your case.

Before you start browsing it’s important to know what sort of CPU you have, as AMD and Intel CPUs use different processor sockets and mounting mechanisms. These designs can change over time too, so its important to check your component documentation or our buyers guide to find out which sort of CPU cooler you should be looking for.

AMD and Intel CPUs produce a lot of waste heat, and without a sufficient cooler will overheat, shutting down or damaging your system. It’s critical therefore to choose an appropriate CPU cooler.

This category contains a huge variety of all-in-one hydrocoolers for AMD and Intel CPUs. These coolers combine a waterblock, pump, tubing, radiator, fans and coolant into a single, sealed unit that's simple to install and doesn't require maintenance or filling. These particular hydrocoolers attach to three free 120mm fan mounts in your case.

Before you start browsing it’s important to know what sort of CPU you have, as AMD and Intel CPUs use different processor sockets and mounting mechanisms. These designs can change over time too, so its important to check your component documentation or our buyers guide to find out which sort of CPU cooler you should be looking for.

PC components produce a lot of waste heat, and without a sufficient cooling will overheat, shutting down or damaging your system. It’s critical therefore to choose an appropriate cooler.

The last thing to bear in mind when choosing a CPU, GPU or SSD cooler is Thermal Interface Material (TIM). This is a thin layer of paste that you spread out between the top of the component and the bottom of the heatsink or waterblock. TIM helps conduct heat out of the CPU by smoothing out imperfections in the surface on either side and is essential for good cooling.

Many coolers come with TIM pre-applied or packaged in a small syringe for you to apply, but it's worth checking before ordering. You can check for the presence of TIM on the product page of the cooler on the Scan website and clicking on the Specifications tab.

PC components emit a lot of waste heat, and whether you opt for an air-cooler, all-in-one hydrocooler or custom watercooling loop your case will need fans to keep everything cool.

This category contains a huge variety of 120mm fans, these used by a huge variety of cases, air-coolers, all-in-one hydrocoolers and watercooling radiators.

Keep an eye out for the airflow, normally measured in CFM (Cubic Feet per Minute) with a higher number indicating more airflow. It's also worth looking at the sound level, normally measured in dBA, with a lower number indicating less noise.Some fans are also optimised for use on radiators, and will be marketed as having a higher static pressure than standard case fans.