Thermal Grizzly

PC components produce a lot of waste heat, and without sufficient cooling will overheat, shutting down or damaging your system. Watercooling provides the ultimate in cooling and aesthetics.

This category contains a huge variety of flexible tubing fittings. Fittings are used to secure the different components of the loop to the tubing. You’ll need two fittings (one in, one out) for each component, making sure that they are the right diameter for your tubing. Fittings are available in a wide variety of finishes so you can match them to the rest of the loop. Fittings are even available in different shapes, including 45° and 90° angles, y-splitters and x-splitters.

Not all coolers fit all of Intel and AMD's processor sockets, so these kits can be used to make a heatsink work with a previously-unsupported motherboard. This category also includes spare screws, fan attachment brackets and other accessories for popular coolers - perfect if you've lost a crucial component.

Open Air chassis cases are suitable for computer builders, repairers and developers. They allow you to have a power supply, hard drive and CD / DVD drive mounted underneath the top tray. With the top bench allowing a motherboard to be quickly mounted. This allows you open access to the board to quickly attach and detach all additional hardware such as memory, CPU, heat sink/fan and graphics card as required.
Updated

PC components produce a lot of waste heat, and without sufficient cooling will overheat, shutting down or damaging your system. Watercooling provides the ultimate in cooling and aesthetics.

This category contains a huge variety of flexible and hardline tubing fittings. Fittings are used to secure the different components of the loop to the tubing. You’ll need two fittings (one in, one out) for each component, making sure that they are the right diameter for your tubing. Fittings are available in a wide variety of finishes so you can match them to the rest of the loop. Fittings are even available in different shapes, including 45° and 90° angles, y-splitters and x-splitters.

PC components produce a lot of waste heat, and without sufficient cooling will overheat, shutting down or damaging your system. It’s critical therefore to choose an appropriate cooler.

The last thing to bear in mind when choosing a cooler is Thermal Interface Material (TIM). TIM helps conduct heat out of the CPU, GPU or RAM into the cooler by smoothing out imperfections in the surface on either side and is essential for good cooling.

These particular thermal pads are an alternative to liquid form of TIM most commonly used with CPU coolers. Thermal pads are pre-cut to be compatible with specific compnents such as GPUs and graphics card VRAM, so make sure to choose the right size pads for your components.

PC components produce a lot of waste heat, and without a sufficient cooling will overheat, shutting down or damaging your system. It’s critical therefore to choose an appropriate cooler.

The last thing to bear in mind when choosing a CPU, GPU or SSD cooler is Thermal Interface Material (TIM). This is a thin layer of paste that you spread out between the top of the component and the bottom of the heatsink or waterblock. TIM helps conduct heat out of the CPU by smoothing out imperfections in the surface on either side and is essential for good cooling.

Many coolers come with TIM pre-applied or packaged in a small syringe for you to apply, but it's worth checking before ordering. You can check for the presence of TIM on the product page of the cooler on the Scan website and clicking on the Specifications tab.

PC components produce a lot of waste heat, and without sufficient cooling will overheat, shutting down or damaging your system. Watercooling provides the ultimate in cooling and aesthetics.

This category contains a huge variety of hardline tubing fittings. Fittings are used to secure the different components of the loop to the tubing. You'll need two fittings (one in, one out) for each component, making sure that they are the right diameter for your tubing. Fittings are available in a wide variety of finishes so you can match them to the rest of the loop.

These particular fittings act as extenders, useful when you need to bridge the gap between two connections.

PC components produce a lot of waste heat, and without sufficient cooling will overheat, shutting down or damaging your system. Watercooling provides the ultimate in cooling and aesthetics.

This category contains a huge variety of hardline tubing fittings. Fittings are used to secure the different components of the loop to the tubing. You'll need two fittings (one in, one out) for each component, making sure that they are the right diameter for your tubing. Fittings are available in a wide variety of finishes so you can match them to the rest of the loop.

PC components produce a lot of waste heat, and without sufficient cooling will overheat, shutting down or damaging your system. Watercooling provides the ultimate in cooling and aesthetics.

This category contains a huge variety of hardline tubing fittings. Fittings are used to secure the different components of the loop to the tubing. You'll need two fittings (one in, one out) for each component, making sure that they are the right diameter for your tubing. Fittings are available in a wide variety of finishes so you can match them to the rest of the loop.

These particular fittings act as angled extenders, useful when you need to go around corners.