PreSonus Eris Pro 6
PreSonus - Eris Pro 6, 6.5" Powered Studio Monitor with Woven Composite LF Driver
6" Professional Studio Monitor
PreSonus - Eris Pro 6
(Single)
Single point-source coaxial design for wider sweet spot and better phase alignmentThe Eris® Pro 6's coaxial design provides a single acoustic point source that creates a natural listening experience, revealing the subtlest nuances in your recordings. Combined with a punchy low-end that defies its compact size, the Eris Pro 6 provides a superior listening experience for both home studios and professional mix rooms.
A 1.25-inch, ultra-low mass, silk-dome tweeter ensures snappy, accurate transient reproduction, while an 6.5-inch, woven-composite woofer offers tight, clear bass, with plenty of punch and no flab. The symmetric coaxial design provides a consistent acoustic center and superior phase alignment between components to deliver a wide sweet spot, precise stereo imaging, and symmetrical dispersion patterns - making the Eris Pro 6 ideally suited for immersive Dolby Atmos rooms and stereo mix environments alike.
Acoustic tuning controls and a three-way Acoustic Space control lets you accurately configure the Eris Pro 6 for your room. Flexible input options enable connection of almost any line-level source, from mixers to audio interfaces and more. Provisions for wall and ceiling mounts make it easy to integrate Eris Pro 6 monitors into any stereo or multi-channel system.
6.5"Driver Size
35Hz - 20kHzFrequency Response
106 dBMax SPL
At a glance
• Single point-source coaxial design for wider sweet spot and better phase alignment
• 6.5-inch, woven-composite, low-frequency driver
• 1.25-inch, silk-dome, high-frequency driver
• 140W, Class AB amplification
• 35 Hz to 20 kHz frequency response
• 106 dB SPL (Peak, @ 1 meter)
• Acoustic Tuning Controls: Acoustic Space (Flat, -2 dB, -4 dB), High Frequency (±6 dB, center 10 kHz, continuously variable), Mid Frequency (±6 dB, center 1 kHz, continuously variable), Low Cut (Flat, 80 Hz, 100 Hz @ -12 dB / octave)
• XLR and ¼-inch TRS balanced and RCA unbalanced rear-panel inputs
• Protection: RF interference, output-current limiting, over-temperature, turn-on/off transient, subsonic filter
• Power Saver mode (engages after 40 minutes)
• Wall and ceiling mountable
Standout Features
INSPIRED DESIGN FOR INSPIRING RESULTS.Placing the high-frequency driver in the center of the low-frequency driver increases clarity, widens stereo imaging, and produces an incredibly even mid-range. Vocal clarity, the attack of a snare, and guitar presence shine through, allowing you to quickly and accurately place them in a mix and get the results you desire faster than ever before.
SET UP YOUR STUDIO MONITORS FOR YOUR ROOM.Acoustic Tuning controls ensure you’ll get the flattest frequency response possible in your mix environment. You get Low Cut, Mid, and High controls, as well as 3-way Acoustic Space tuning that allows you to easily compensate for the sonic consequences of speaker placement against a wall or in a corner.
SYMMETRIC RESPONSE.The Eris® Pro 6’s coaxial design provide a symmetrical dispersion resulting in a crisper stereo image, greater soundstage depth, and superior separation between components in a complex mix.
The Tech Spec
| Features | Specification | Voltage | 220-240V UK |
|---|---|
| Wattage | 140 Watts |
| Input Impedance | 10 kΩ |
| Peak SPL | 106 dB (@ 1 meter) |
| Crossover Frequency | 3.2 kHz |
| Cabinet Material | Vinyl-Laminated, Medium-Density Fiberboard |
| Audio Controls | Volume High Frequency (±6 dB, center 10 kHz, continuously variable) Mid Frequency (±6 dB, center 1 kHz, continuously variable) |
| Monitor Inputs | 1- Balanced XLR, 1- Balanced ¼” TRS, 1- Unbalanced RCA |
| Measurements | DIMENSIONS 28.96x23.88x28.45 CM SHIPPING WEIGHT 7.72 KG PRODUCT DEPTH 11.19" (28.4 cm) PRODUCT HEIGHT 11.4" (29 cm) PRODUCT WIDTH 9.45" (24 cm) SHIPPING LENGTH 28.45 CM SHIPPING HEIGHT 28.96 CM SHIPPING WIDTH 23.88 CM |
