DIY Water Cooling
The two most critical components in a gaming PC, the CPU and the graphics card, generate a lot of waste heat that needs to be removed from the case. Water is a much better conductor of heat energy that air, so watercooling your PC could make it cooler, quieter and potentially allow you to overclock components further. This category encompasses all types of watercooling from all the individual components required to build a watercooling loop, including blocks, pumps, reservoirs, radiators, fans, tubing and different coloured fluids plus complete kits.
The coolants here are both aesthetically pleasing and highly functional. They are designed to prevent corrosion and the growth of algae, both of which would prove problematic and reduce your systems cooling ability. Pre-mixed solutions are available in a wide variety of colours, including UV reactive ones.
Hardline acrylic tubing looks stunning, but needs special fittings to hold the tubes in place compared to standard flexible tubing. The fittings in this category are all specially designed for hardline acrylic tubing and are available in a variety of colours and sizes to match the diameter of your tubing.
- EK-HDC Fitting 12mm G1/4, Solid-tube compression fitting, Nickel£4.49£5.48 NEXT DAY DELIVERY
Fittings are a critical component in a watercooling loop as they secure the flexible tubing between the various components, such as the blocks, pump, reservoir and radiator. The fittings in this category are designed to secure 10/16mm (3/8"-5/8") tubing and pre-threaded for easy installation.
Fittings are a critical component in a watercooling loop as they secure the flexible tubing between the various components, such as the blocks, pump, reservoir and radiator. The fittings in this category are designed to secure 10/13mm (3/8"-1/2") tubing and pre-threaded for easy installation.
- EK-ACF Fitting 10/13mm Soft Tube Compression Fitting G1/4, Brass - Nickel Plated£4.99£5.48 NEXT DAY DELIVERY
These products enable to easily add a fill port to your waterloop loop. When mounted at the highest point of a loop it allows you to easily fill and top-off the fluid, without having to dismantle your PC. Fill ports are not necessary, but make maintaining a watercooled PC much easier than a loop without one.