Two Notes ReVolt Bass
Two Notes ReVolt Bass, ECC83 Tube, Speaker Simulation
Email me when the availability or price changes
Finance this product
- Spend over £280.00 and Buy Now, Pay Later or spread the cost of your finance over 24-48 months with a 10% deposit.
- SCANPROTECT Protect against installation damage for 28 days.
Analogue Amp Sim
Two Notes - ReVolt Bass
The bass: It’s the bedrock of any performance,
demanding nothing short of tonal excellence.
Enter ReVolt Bass, a forward-thinking all-analogue 3-channel Amp Sim primed to serve as the beating-heart of your rig. The latest-iteration of Two notes’ critically- acclaimed Amp Sim solutions has been engineered with a singular mission: to empower players with the ultimate in foundation tone.
Forget any preconceptions of a run-of-the-mill amp-in-a-box, preamp or DI: ReVolt Bass stands-apart. It’s inspired by a trio of iconic tones; It’s fuelled by 200V and genuine tube power; It’s born to assimilate into a myriad of usage scenarios; it gives you edge when you need it, thanks to an integrated Drive Channel Dry/Wet Blend.
Two notes' getting it: Your Tone Matters. Why settle for anything short of perfection?
at a glance
• Bass Preamp in pedal format
• Analogue circuit with one ECC83 tube
• 3 channels (Classic Clean, Vintage Dirt, Modern Drive)
• Analogue speaker simulation with On/Off switch
• Balanced XLR output with ground lift
• Power supply included
3 It's A Magic Number
iconic bass amplifiers Center stage on ReVolt Bass are a trio of tonally-district channels inspired by an Ampeg® SVT '76, a Marshall® 1992 JMP Super Bass Mark II, plus a custom proprietary high gain Bass amp, specified for the exacting needs of the modern bass player.
Channel 1CLASSIC CLEAN: Is - put simply - iconic, delivering the thump, full-frequency response and power synonymous with channel 1 on the legendary Ampeg® SVT '76. A titanic tone guaranteed, oozing with rafter-rattling low end, punchy mids and buttery smooth highs.
Channel 2VINTAGE DIRT: Is your weapon of choice in moments where you just need to cut above the rest. Taking inspiration from a Marshall® 1992 JMP Super Bass Mark II, this is the epitome of a larger-than-life bass tone topped with lashings of vintage dirt.
Channel 3MODERN DRIVE Delivers ultimate flexibility for the forward thinking player. Based on an original Two notes design, it’s super-tight with an abundance of gain for a thick “gained-to-the-max” tone. For added tonal versatility, there’s a switchable Dry/Wet Blend that delivers precision and clarity when you need it.
Mojo Maker
revolutionary It’s a fact: DI is convenient. It’s reliable. It's a pure unadulterated tone that’s surgically controlled to the smallest iota. There’s just one snag; It lacks the all-important warmth synonymous with tube amps. ReVolt’s 12AX7 preamp tube running at 200V has been expertly tuned to enrich your tone with undeniable tube mojo. The result is revolutionary. You retain all the convenience of a DI signal, now with the warmth, the bite, the all-important response you demand.
HOOKUP FLEXIBILITYReVolt Bass delivers whatever the setup scenario. First, go direct - it’s simple and sounds phenomenal. For total integration, switch on the 4-Cable mode and add 3 pristine channels to your amp head. Finally, get the most from a Hybrid setup and hook-up ReVolt to your amps FX return!
DIAL IT INThe right EQ is paramount when shaping pristine bass tones. That’s why ReVolt Bass is outfitted with a two-band EQ on channel 1, and a shared 3-band EQ on channels 2 and 3. It’s everything you demand from an EQ: musically harmonic in all the right places, and deftly tuned for precision.
THE PERFECT BLENDWhen you need best-of-both-worlds - the rounded thump of your dry DI signal with the snarl of surgically tuned distortion - ReVolt Bass’ Modern Drive channel is the answer. Dial in your wet/dry blend and enter a world of saturated Analogue bliss without sacrificing the pin-point precision you need.
DROP THE MICReVolt Bass’s analogue cabinet simulation inspired by Ampeg® SVT-810E bass cabinet, gives you one less headache in the quest for reliable sonics. Switch on the cab sim, hookup to a mixer, PA or FRFR cabinet and you’re set for virtually any recording or performance scenario.
Introducing ReVolt Bass | 3 Channel All-Analogue Bass Amp Simulator / DI
The Tech Spec
| Features | Specification | Input | Jack 6.35 mm (1/4”) unbalanced (TS, Tip/Sleeve) Impedance : 1 MOhms |
|---|---|
| Send | Jack 6.35mm(1/4“) unbalanced (TS) Max output level : +11dBu Impedance : 300 Ohms |
| Return | Jack 6.35mm(1/4“) unbalanced (TS) Max input level : +11dBu Impedance : 1 MOhms Unbuffered, directly connected to Output when active |
| Output | Jack 6.35 mm (1/4”) unbalanced (TS) Max output level : +11 dBu Impedance : 300 Ohms |
| DI Output | XLR, balanced Impedance : 600 Ohms balanced, 300 Ohms unbalanced Max output level : +11dBu Protected against +48V phantom power |
| Phones | Jack 3.5 mm (1/8“) stereo (TRS, Tip/Ring/Sleeve) Impedance : 39 Ohms |
| Aux In | Jack 3.5 mm (1/8“) stereo (TRS, Tip/Ring/Sleeve) Impedance : 10 kOhms |
| Tube | PSVANE ECC83 |
| Boost Circuit | +0 dB to +20dB, centered around 1.1 kHz |
| Mains power adaptor | DC Jack 2.1mm, negative center |
| Input voltage | 12V DC |
| Power consumption | Approx. 6W |
| Current draw | 600mA |
| Width x Depth x Height | 19.2cm x 11.7cm x 7cm |
| Weight | 845 g |
