Tascam - TM-200SG, Shotgun Condenser Microphone for Video Shooting
Tascam - TM-200SG, Condenser Shotgun Microphone, 30Hz-20kHz Frequency Response, with Soft Case, Windscreen, and Mic Clip
- SCANPROTECT Protect against installation damage for 28 days. More info
Condenser Shotgun Microphone
Tascam - TM-200SG
perfect for boom arm applications!Sometimes you need precise and isolated voice capture, and also need to be wary of crowding a shot or be wary of the confines of a small studio. In these instances, you need to reach for the Tascam TM-200SG shotgun condenser mic. The TM-200SG’s acutely detailed back-electret condenser element and incredibly focused supercardioid polar pattern enable you to tune in on dialogue, even from a considerable distance and in loud environments.
The TM-200SG serves up full-range audio reproduction, from a lowly 30Hz – 20kHz, to capture each and every nuance of your audio source as it happens. On occasion dependent on the set, you’ll need to limit wind and external noise and this is where the TM-200SG’s 160Hz low-cut filter cuts out a considerable amount of the muddy low-range frequencies and leaves you with clean, precise audio capture. It’s features like this which really make Tascam’s TM-200SG a great choice for boom operation, alongside other features such as it’s light weight and compact form factor, once attached to a boom arm, you’ll hardly notice it’s even there!
Also included is a carry case, alongside a shoe mount mic clip and windscreen! Grab yours now!
200ΩImpedance
30Hz - 20kHzFrequency Response
132dBMax SPL
at a glance
• Compact and light design
• Supercardioid directivity ensures high sound quality in outdoor applications
• Easy-to-handle shotgun mic for film shooting, vlogging, reporting, or news coverage
• Switchable low-cut filter to reduce low-frequency noise
• Attaches to the camera with standard-size shoe mount
• Wind screen included to avoid wind noise
• Operates on phantom power (DC 48 V)
The Tech Spec
| Features | Specification | Transducer type | Back-electret condenser |
|---|---|
| Polar pattern | Supercardioid |
| Output connector | 3-pin XLR, male |
| Frequency response | 30 Hz to 20 kHz |
| Low-cut filter | 160 Hz, –3 dB |
| Sensitivity | –40 dB ±3 dB (0 dB = 1 V/Pa at 1 kHz) |
| Output impedance | 1 kΩ ±30 % (at 1 kHz) |
| Load impedance | 200 Ω ±30 Ω |
| S/N ratio | 74 dB |
| Maximum SPL | Yes |
| Supply voltage | DC 48 V (phantom power) |
| Supply current | 3 mA |
| Dimensions (L × Ø) | 153 mm × 23 mm |
| Weight | 53 g |
| Included items | Shoe-mount mic holder, windscreen, storage bag |
