Arctic Liquid Freezer III Pro 360 A-RGB White All In One Liquid CPU Cooler
Refurbished Arctic Liquid Freezer III Pro ARGB 360 AIO Hydro CPU Cooler, White, 3x120mm P12 Pro, 60mm VRM Fan, Copper
Email me when the availability or price changes
Finance this product
- Spend over £390.00 and Buy Now, Pay Later or spread the cost of your finance over 24-48 months with a 10% deposit.
- SCANPROTECT Protect against installation damage for 28 days.
A Worthy Upgrade
The Arctic Liquid Freezer III Pro ARGB builds on an already capable platform with measurable thermal improvements and upgraded components. With new P12 Pro ARGB fans delivering higher airflow and static pressure across the full RPM range, and an improved radiator design that increases both surface area and coolant volume, the Pro ARGB keeps temps in check more efficiently—even under heavier CPU loads. Setup remains quick and user-friendly, with pre-installed fans and included MX-6 thermal paste.
Ready Out-of-the-Box – Easy Installation
The Liquid Freezer III Pro ARGB arrives pre-assembled with its radiator fans in a push configuration, with fan cables routed cleanly through the braided tubing. With only one PWM cable to connect, setup is fast and frustration-free. The included MX-6 thermal compound is ready to apply in a cross pattern for optimal coverage via the cold plate.
Upgraded VRM Fan Cooling
The integrated 60 mm PWM-controlled VRM fan continues to actively cool the socket area, stabilizing voltage regulator temperatures. This is especially beneficial in airflow-restricted cases or overclocking setups, helping maintain performance and extend component lifespan.
Intel Contact Frame – Reduced CPU Stress
The custom mounting frame for Intel’s LGA 1700 socket applies pressure evenly across the CPU surface, avoiding PCB deformation caused by Intel’s standard ILM bracket. The result: reduced mechanical stress on the CPU and motherboard, with consistent cooling over time.
Offset Mounting for Intel and AMD
Offset Mounting for Intel and AMDUnlike traditional central mounting systems, the Liquid Freezer III Pro ARGB’s offset mount positions the cold plate directly over the CPU hotspot—particularly important for AMD's chiplet architecture and modern Intel dies—resulting in more efficient thermal transfer.
Now Pulsing with Colour
The Liquid Freezer III Pro ARGB takes everything great about the original and dials it up with a full-on lightshow. Each fan now comes loaded with 12 Gen2 ARGB LEDs, giving you deep, vivid lighting customisation straight out of the box. Sync it with ASUS Aura, RGB Fusion, Mystic Light, Polychrome Sync or even SignalRGB—this cooler doesn’t just perform, it puts on a show. All the same upgraded thermal performance is here too, now wrapped in colour.
Next-Gen P12 Pro ARGB Fans
Behind the glow, the P12 Pro ARGB fans are serious performers. With a wide 600–3000 RPM range, 6.9 mmH2O of static pressure and up to 77 CFM of airflow, they push air like champs whether you’re idling or gaming full throttle. Each one is powered by a fluid dynamic bearing for quiet, long-lasting use—and with both a 4-Pin fan header and 3-Pin ARGB connector, they’re as plug-and-play as they are head-turning.
Improved Radiator and Tubing Design
The 38 mm-thick radiator increases the surface area and liquid volume by 23%, effectively reducing heat saturation during extended performance spikes. Reinforced EPDM tubing with durable braided sleeves boosts longevity while maintaining flexibility.
Flexible Control Options
Two control setups are available: connect via the all-in-one PWM cable for unified fan and pump control, or use the included splitter for independent tuning of the pump, VRM fan, and radiator fans. This allows temperature-specific fan curves and performance tuning.
MX-6 Thermal Paste Included
The Liquid Freezer III Pro ARGB comes with Arctic’s premium MX-6 thermal paste. Designed for even distribution under pressure, it ensures reliable heat transfer between CPU and cold plate.
• High-performance AIO cooler with new P12 Pro fans and offset mounting for better hotspot coverage on both Intel and AMD platforms.
• VRM fan included for additional socket cooling in airflow-restricted or overclocked setups.
• Pre-installed, sleeved fans and MX-6 paste for a cleaner, faster installation.
• Each fan is packed with 12 ARGB LEDs, compatible with most popular motherboard controllers, including SignalRGB support.
Compatibility: Intel LGA1851, LGA1700 / AMD AM5, AM4
.
Radiator: Aluminium, 398 (L) x 120 (W) x 38 (H) mm.
Radiator Fans: 3x P12 Pro ARGB (600–3000 RPM, 77 CFM, 6.9 mmH2O static pressure, FDB)
.
VRM Fan: Integrated 60mm (400–2500 RPM, PWM-controlled)
.
Pump: 800–2800 RPM (PWM-controlled), 0.35 A / 12 V DC.
Cold Plate: Copper with micro skived fins.
Tube Specs: 450 mm length, 12.4 mm outer / 6.0 mm inner diameter.
Thermal Paste: MX-6 (0.8 g included).
