QUBIC SYSTEM QS-H13 2DOF Low-Latency Seat Mover for Simulation Cockpits

Qubic System QS-H13 Seat Mover

Elevate your sim racing or flight simulation experience with the Qubic System QS-H13, a compact 2DOF seat mover designed to deliver intense and precise pitch and roll motion without taking over your simulator space. Built using the same proven linear actuator technology as the QS-220, the QS-H13 combines exceptionally long travel with ultra-fast response times, integrated low- and high-frequency haptics and ultra-quiet operation. With a deeply positioned pivot point, industrial-grade construction, 130kg maximum user payload and compatibility with most aluminium profile cockpits, the QS-H13 provides an immersive motion solution for demanding racing and flight simulation setups.

Feel Precise Pitch and Roll Motion

Experience dynamic vehicle movement through two degrees of freedom, with the QS-H13 delivering smooth and precise pitch and roll motion. The system can reproduce effects including acceleration, braking, lateral acceleration, elevation changes, body roll and pitch, wheel slip, wheel lock, rumble strips and side slip, providing physical feedback that closely follows the behaviour of the simulated vehicle or aircraft.

Experience Integrated Haptic Feedback

Feel more than just movement with integrated low- and high-frequency vibration effects. The QS-H13 transfers haptic feedback directly through the seat and cockpit hardware, allowing you to experience engine pulses, RPM changes, gear shifts, road texture, micro-bumps, curbs and rumble strips without relying on external vibration devices such as bass shakers.

React with Ultra-Low Latency

Keep motion closely synchronised with your simulation using the QS-H13's ultra-low latency response. Qubic System specifies latency of just 10ms from receiving the telemetry signal to the machine responding with physical motion, helping maintain a responsive connection between on-screen events and the movement you feel.

Experience Natural G-Force Dynamics

Enhance the sensation of acceleration, braking and cornering with the QS-H13's deeply positioned pivot point. Located close to the user's seat, the pivot arrangement helps create more natural body movement and improves the perception of G-forces, contributing to a stronger sense of being inside the simulated vehicle.

Enjoy Quiet, Neighbour-Friendly Operation

Run your simulator without the excessive mechanical noise associated with many motion systems. The QS-H13 uses an actuator architecture without the gearboxes and DC motors commonly found in other solutions, while its design avoids vertical up-and-down movement that can transfer vibrations into the floor. The result is smooth, quiet operation with a specified noise level below 58dB(A) under normal conditions.

Build a Compact Motion Simulator

Add dynamic motion without requiring a large motion platform. The QS-H13 is designed as a compact seat mover for simulator users with limited space, while its robust industrial-grade construction provides the structural rigidity required to maintain a stable connection between the seat and motion system. The unit measures 41.71cm long, 46.06cm wide and 23.09cm high, with a product weight of 33kg.

Support Up to 130kg

Accommodate a wide range of drivers and pilots with a maximum user payload of 130kg. The QS-H13 is engineered around a rigid motion platform capable of delivering its pitch and roll movement while supporting the user's weight, with Qubic System recommending a FIA-certified racing seat and harness for safety and optimal performance.

Install on Aluminium Profile Cockpits

Integrate the QS-H13 into a wide range of simulator frames using the supplied universal mounting adapters. The seat mover is designed to fit most aluminium profile cockpits without additional brackets or drilling, while dedicated mounting provisions also allow the QS-BT1 Seat Belt Tensioner to be integrated into the system.

Expand Your Motion Setup

Build a more immersive simulator by combining the QS-H13 with other Qubic System hardware. The seat mover can operate independently or integrate with the QS-BT1 Seat Belt Tensioner, while compatibility with Qubic System devices including the QS-210, QS-220 and QS-CH2 allows it to form part of a wider motion ecosystem.

Control Motion with Qubic Manager

Fine-tune your simulator experience through Qubic Manager, Qubic System's dedicated motion platform software. The software provides control over motion effects including bumps, roll and pitch and supports major racing and flight simulation titles on PC. Qubic Manager also includes native VR motion compensation, helping maintain a smoother visual experience when using virtual reality.

Compatibility

The Qubic System QS-H13 requires installation on a stable aluminium profile cockpit and is designed to fit most aluminium cockpits and a wide range of other popular cockpit designs using its supplied mounting adapters. It is compatible with the Qubic System QS-BT1 Seat Belt Tensioner and can be integrated with other Qubic System hardware including the QS-210, QS-220 and QS-CH2. The QS-H13 is designed for both sim racing and flight simulation applications and requires a PC connection for operation through Qubic Manager.

• 2DOF seat mover with pitch and roll motion.
• Designed for sim racing and flight simulation.
• Long-travel motion with ultra-fast response.
• 10ms specified telemetry-to-motion latency.
• Integrated low- and high-frequency haptics.
• Deeply positioned pivot point for enhanced G-force dynamics.
• Quiet operation below 58dB(A) under normal conditions.
• 130kg maximum user payload.
• 33kg product weight.
• Compatible with most aluminium profile cockpits.
• Supplied universal cockpit mounting adapters.
• Compatible with Qubic System QS-BT1 Seat Belt Tensioner.
• Compatible with QS-210, QS-220 and QS-CH2 systems.
• Qubic Manager software support.
• Native VR motion compensation through Qubic Manager.
• Compact design for space-conscious simulator setups.