Monsoon Hardtube 13/10mm ID 3/8" OD 1/2" 77cm - Clear

Monsoon Hardtube 13/10mm, ID 3/8", OD 1/2", 1x 77cm length, Clear

Monsoon
Scan code: LN59667 Manufacturer code: ATH-3812-1-CL Request call
£6.98
Spend over £225 and Buy Now, Pay Later or spread the cost of your finance over 24-48 months with a 10% deposit.
High End
Delivery options £5.48 By DPD On 21st Nov 2017 DPD Delivered to your specified address. Receive SMS with one-hour delivery window. £4.79 Collect from local shops UPS and DPD Pickup Collect your parcel from your newsagents, petrol stations and convenience stores. Free Collect Instore Q-Collect Place your order online and collect from our Bolton store with Q-Collect. Weekend, timed and European delivery options are available at checkout ScanProtect protection ScanProtect Protect against installation damage for 28 days.More
Frequently Bought Together
Product Overview Available in 8 colors and two sizes and manufactured from premium virgin PMMA for the look you want and the reliability you demand. Acrylic Hardline from Monsoon allows you to route your tube runs exactly where you want them and eliminates all those unsightly and expensive adapters, tube coils, etc. for the cleanest, most economical loop installations.

Compatible with all three styles of Monsoon Premium Hardline fittings featuring Hard/Lock, and with Monsoon economy push in style fittings.

Attention: The tube may, for manufacturing reasons have up to 30% deviation from the declared external diameter! Therefore, please glue the pipes with the specially developed acrylic adhesive of Monsoon (recommended accessory) in the ports so as to prevent easy removal of the pipes from the connections! Features • Plasticiser free.
• Available in 2 sizes and 8 beautiful colours.
• Premium Virgin PMMA.
• Available in 24” four packs and 30” single packs.
Warranty

Please note your statutory rights are not affected.

For further information regarding Scan's warranty procedure please see our terms and conditions

Warranty information has not yet been updated for this product. For further information please call 0871 472 4747 or 01204 474747.

Customers also bought
Reviews
Monsoon Hardtube 13/10mm, ID 3/8", OD 1/2", 1x 77cm length, Clear is rated 4.7 out of 5 by 3.
Rated 4 out of 5 by from Patience is a virtue I keep going back to this product as a hard tubing basic now that I spent some time deciding on fittings that would accept this size perfectly. (Please take the time to research the EXACT measurements to get correct fittings for this tube) Hard tubing of this size is a fine art that needs to be practised, buy extra as I can almost guarantee you will screw some of it up, buy a decent hot air gun and I would recommend to invest in bending equipment to get that perfect angle. To avoid kinks a bit easier, as a beginner I would advise using thicker tube to start. A good all round product.
Date published: 2017-06-01
Rated 5 out of 5 by from Great quality from monsoon I was going to get primochill but loads of people suggested monsoon , very easy to use and cut good lengths for a good price , depending what your building I was getting 3 tubes but glad I got 4 I re done one part from cpu to the mosfets and got couple spare bits left but not enough to do anymore
Date published: 2015-09-12
Rated 5 out of 5 by from The best acrylic tubing by far imho This tubing from Monsoon is top quality stuff. Easier to get a good bend and feels a lot better quality than primochills hobby supplies store offering. the finish is also much better and it cuts so much easier with a junior hacksaw. The lengths are also longer so you have more freedom to build your loop the way you want it. Don't forget you are also going to need a silicone rubber cord insert to bend the tubing and a heat gun to soften the acrylic. A few necesseries you will need to bend the tubing http://www.scan.co.uk/products/monsoon-hardline-pro-cutting-kit-13-10mm-id-3-8-od-1-2 http://www.scan.co.uk/products/monsoon-silicon-bending-insert-blue-for-id-3-8-10mm http://www.scan.co.uk/products/monsoon-hardline-pro-heat-gun
Date published: 2014-12-12
  • y_2017, m_11, d_17, h_21
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_3
  • loc_en_GB, sid_59667, prod, sort_[SortEntry(order=FEATURED, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_scan
Questions & Answers

Are there any perticular fittings required for acrylic tubes?

I have not yet begun to water cool my rig but I am going to very soon and would much rather this tubing kind over soft flexi. So would like this answered as to avoid any unwanted mistakes on my part. Thankyou.
Asked by: luigiboi
Hi there, Don't know how old this question is but if you're still thinking about it you just need to make sure you match the outer diameter as they can catch you out the most. I used these fittings with this pipe https://www.scan.co.uk/products/alphacool-ht-13mm-hardtube-compression-fitting-g1-4-for-acrylic-brass-tube-deep-black but there are many other alternatives. Be careful not to buy ID 10mm with OD 12mm, they will not fit this type of tubing. I put a review on these about the advise for bending. Have a handful of patience ready :D
Answered by: SparkyParky
Date published: 2017-08-05
  • y_2017, m_11, d_17, h_21CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_1
  • loc_en_GB, sid_59667, prod, sort_[SortEntry(order=LOCALE, direction=DESCENDING), SortEntry(order=FEATURED, direction=DESCENDING), SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_scan
Monsoon Hardtube 13/10mm ID 3/8" OD 1/2" 77cm - Clear
Monsoon Hardtube 13/10mm ID 3/8" OD 1/2" 77cm - Clear