Maestro - Invader Distortion Distortion Effects Pedal
Maestro - Invader Distortion, Fully Analogue Modern High-Gain Distortion Effects Pedal
Email me when the availability or price changes
Finance this product
- Spend over £390.00 and Buy Now, Pay Later or spread the cost of your finance over 24-48 months with a 10% deposit.
- SCANPROTECT Protect against installation damage for 28 days.
Distortion Effects Pedal
Maestro - Invader Distortion
Relentless Power & DistortionThe Maestro Invader Distortion is a fully analogue, high-gain modern distortion pedal that offers a heavy and aggressive sonic character with loads of rich harmonics to complete your tone. The Maestro Invader Distortion provides you with a wide variety of distorted sounds. The simple 3-knob control makes it easy for users to shape their sound using Gain (distortion amount), Tone, and output Level, with plenty of volume to easily accommodate for each style.
A unique feature that sets this pedal apart is the built-in noise gate with the top panel toggle switch, keeping your tone tight and free of hum and feedback. An internal trim pot mounted within the circuit board inside the pedal allows the users to control the level of the noise gate's Threshold. The true bypass footswitch triggers the LED lights inside the Maestro logo when it’s on, so you can always see when the effect is active.
at a glance
• Fully Analogue distortion pedal
• Modern high-gain distortion sounds
• Tone control shapes your sound
• Controls: Gain, Tone, Level
• Switch: Gate On/Off
• True bypass
Maestro Invader Distortion Demo
The Tech Spec
| Features | Specification | Switches | True Bypass footswitch, Gate On/Gate Off toggle switch |
|---|---|
| Led Indicators | Red, yellow, and blue bugles in the Maestro logo illuminate when the pedal is active |
| Signal Processing | All-Analogue |
| Power Requirement | 9V battery or regulated 9VDC power supply (5.5 X 2.1 mm plug, wired center-negative) |
| Current Draw | 56.7 mA |
| Power On Switch | Incorporated into the input jack. Unplug the input when not in use to prevent battery drain. Remove the battery when the pedal is going to be stored for long periods to prevent leakage and damage. |
| Input Impedance | 100 kOhms |
| Output Impedance | 100 Ohms |
| Switching Type | True Bypass |
| Dimensions | 5.04" x 3.45" x 2.5" 128.0 mm x 87.6 mm x 63.5 mm |
| Weight | Net: 1.24 lb. (562.5 gm.) Gross: 1.62 lb. (734.8 gm.) |
