Intel 24 Bay 2U R2224WFTZS Barebone Dual Xeon Skylake-SP Server
This Skylake-SP Xeon Barebone Server comprises of an Intel Skylake-SP Server Motherboard, Intel Server Chassis, & Server-grade PSU, whilst leaving you with the freedom to select all the other necessary components based on your operations unique needs.
At this Barebone Server’s heart sits the Intel Wolf Pass Server Motherboard, S2600WFT, with dual FCLGA 3647 sockets supporting up to Two Bronze, Silver, Gold, or even Platinum Xeon Processors of a maximum TDP of 145W each. Each one of these will also have access to their own single Intel Omni-Path port.
Your choice of CPUs can then be fed by up to 24 DDR4 DIMMs running at 2400MHz, as this board provides 12 slots per Xeon CPU. With Two Purley Xeons installed you can install massive amounts of memory with its support for Registered DIMMs & Load-Reduced DIMMs, while the 12 memory channels (6-per CPU) provide unparalleled bandwidth.
8 PCIe slots can be provided by a total of 3 riser cards; Two of which are included, the 3rd is available separately. In addition to this there is a PCIe 3.0 x8 SAS Module. M.2 PCIe SSDs can be used in conjunction with this unit from the start, as the motherboard features dual M.2 22x80mm slots. One slot uses 4 Lanes of PCIe, while the other utilises 2. 4 OCuLink connectors also enable the usage of Direct Attach PCIe SSDs.
Dual 10GBASE-T down ports are provided on-board with this configuration, with the choice of adding Dual 10GBADE-T or Dual SFP+ via the OCP Mezzanine. USB 3.0, Serial Port, & VGA (D-SUB) connectivity can be found on the rear, however additional USB & video ports can be added later if necessary by connecting to the on-board headers.
ASPEED & RMM4 Lite are supported for server management using a dedicated RJ45 management port, while security features such as TXT, TPM 2.0, or Bootguard are compatible.
The Bighorn Peak-P Chassis, R2224WFTZS, itself is in a 2U rackmount formfactor and provides front hot-swap access to up to 24 2.5” SATA or SAS Hard Drives. Two additional hot-swap 2.5” SATA/SAS bays can also be located at the rear of the chassis, whilst there is space for Two SSDs to be mounted along an optional air duct.
Redundant cooling for the entire system is supplied by Six 40mm Fans with Dual Rotors, to ensure your server can perform at its best. A single 1300W Titanium-rated Power Supply is fitted to drive it all, however there is space for an additional unit to provide redundant, or combined power. Features S2600WFT Motherboard Features:
• Dual (2) Intel® Xeon® processor Scalable Performance family supported: up to 145W TDP.
• LBG -4 Chipset.
• 24 DDR4 RDIMMs / LRDIMMs, 2 SPC, 12x channels/system Memory.
• NVM DIMM Enabled Up to 12,1 per channel.
• 2400 MHz 2DPC, 2667 MHz 1DPC Memory Speeds Supported.
• Up to 8 PCIe slots via 3 Risers, One x8 PCIe Gen 3 SAS Mezz Module.
• Dual M.2 PCIe connectors (x2, x4) 80mm.
• 4 OCuLink connectors for Direct Attach PCIe SSD.
• Dual 10GBASE-T down Ethernet.
• Dual 10GBASE-T or Dual SFP+ Ethernet via OCP Mezzanine.
• Intel Omni-Path Fabric: 1 port per processor.
• Rear I/O: 3x USB 2.0/3.0, 1x serial, 1x video, 2x LAN for S2600WFT only.
• Front I/O: 2x USB 2.0/3.0, video.
• Manageability: ASPEED and RMM4 Lite, Dedicated Management RJ45 Port.
• Security: TXT, TPM 2.0 (via firmware or accessory), Bootguard.
Please note: Quick Assist is only supported with an optional add-in card, not included, sold separately.
Server Chassis Features
• Redundant Cooling: 6 dual rotor 40 x 40 mm fans.
• Six (6) FH PCI form factor cards (4 FHFL +2 FH1/2L) on two PCIe Gen3 Riser connectors (Riser 1 and 2).
• Two (2) LP PCIe form factor cards on one (1) PCIe Gen 3 x16 connector (Riser 3) (Optional accessory, not included, sold separately).
• One x8 PCIe Gen 3 SAS Module.
• One OCP KR based mezzanine.
• Upto 24 hotswap 2.5” SATA/SAS hard drives.
• Two (2) hotswap 2.5” SATA/SAS hard drives at rear of chassis.
• Two M.2 modules, one x2 and one x4, 80mm size.
• Support for 2x fixed SSDs on airduct (optional).
• NVMe Capacity: 2U: up to 24 -2.5” drives, up to 2 -3.5” drives.
Power Supply Support:
• Upto 2, supporting 1+0, 1+1Redundant and 2+0 Combined Power.
• CRPS 1+1 1300W Titanium PSU(single included & installed).
• Dimensions (2U): 438 x 87.3 x 704.9mm.
• Board Support: 16.7” x 17.05” formfactor(WolfPass).
|No. of Threads||N/A|
|Motherboard Form Factor|
|Memory Capacity Included||N/A|
|Memory Type (ECC)|
|Memory Type (R/U)|
|Memory Speed (Mhz)|
|Max. Memory Capacity|
|Processor/Motherboard Graphics Chip||N/A|
|GPU Tensor Cores|
|Base GPU Speed||N/A|
|Max. GPU Speed||N/A|
|GPU Memory Size|
|GPU Memory Type|
|GPU Memory Clock|
|GPU Memory Bus|
|SLI Multi-GPU Configuration||No|
|Max. GPU Resolution|
|Storage Drive Included||No|
|Storage Drive Type|
|Storage Drive Capacity||N/A|
|Network Interface Type|
|Keyboard / Mouse Included||No|
|Remote Control Included||No|
|PSU Efficiency Rating|
|Operating System Included||No|
Please note your statutory rights are not affected.
For further information regarding Scan's warranty procedure please see our terms and conditions
Warranty information has not yet been updated for this product. For further information please call 0871 472 4747 or 01204 474747.