CIOKS CRUX Add-on for DC7
CIOKS - CRUX Add-on for CIOKS DC7, Converts the 24V Aux Outlet on DC7 Into a 24W 9 or 12V Outlet
Email me when the availability or price changes
Finance this product
- Spend over £280.00 and Buy Now, Pay Later or spread the cost of your finance over 24-48 months with a 10% deposit.
- SCANPROTECT Protect against installation damage for 28 days.
Add-on for CIOKS DC7
CIOKS - CRUX
High-powered 9 or 12V outletCIOKS CRUX is the ultimate add-on to CIOKS DC7 if you are using a Neural DSP Quad Cortex, a Line 6 HX-series pedal or another power-hungry 9V or 12V multi-effects pedal. Just connect the CRUX to the 24V outlet on DC7, set the correct voltage on CRUX, connect the appropriate CIOKS Flex cable from CRUX to your multi-effect pedal and you are good to go.
Using CRUX frees up the outlets on DC7 that would otherwise be needed to run these devices (for instance four for a Neural DSP Quad Cortex and two outlets for a Line HX Stomp), allowing you to run more pedals along with your multi-effects device. CRUX therefore provides a simpler, more reliable setup and gives you more options for connecting extra pedals.
At A Glance
• Converts the 24V aux outlet on DC7 into a powerful 9 or 12V outlet with a total power of 24W
• Powers a Neural DSP Quad Cortex with DC7 saving you 4 outlets on the DC7
• Overload and short circuit protected outlet
• Overvoltage protected outlet protecting your equipment
• CIOKS CRUX has the same 1-inch profile (25,4mm) as CIOKS DC7
• Compatible with CIOKS MiniGRIP for drill-free mounting underneath Pedaltrain boards (sold separately)
• One 24V DC Link cable included
• Two Flex cables included
• Designed in Denmark, assembled in Poland
• 5-year worldwide warranty
What's Included?
• 1x Flex 1050 – Type 1 - 5,5/2,1mm DC-plug, centre negative, L-shape, 30cm (black)
• 1 x Flex 3050 - Type 3 - 5,5/2,5mm DC plug, centre negative, L-shape, 50cm (yellow)
• 1 x L2415 DC Link cable - EIAJ to EIAJ, 15cm (black)
• 1 x CRUX adapter
• 1 x L2415 DC Link cable
• 2 x Flex cables, #1050 and #3050
• Mounting hardware for Pedaltrain and Templeaudio boards
• 1 x Product manual
• 1 x Flex Guide
• 1 x CIOKS sticker sheet
The Tech Spec
| Features | Specification | Input | 24V DC |
|---|---|
| Output | 9V DC / 2700 mA or 12V DC /2000 mA |
| Total Output Power | max. 24W |
| Output Jack | 1/4 inch standard phone jack |
| Equivalent Input Noise | -114 dB or less (input shorted IHF-A |
| Maximum Output Level | 0 dBm |
| Maximum Gain | +40 dB (at 1.5 KHz) |
| Controls | Drive, Tone, Level |
| Switch | Normal/Effect (true bypass configuration) |
| Power Supply | 9V Manganese dry cell battery (6F22) or special AC adaptor |
| Power Voltage | DC9 V (Battery) / DC10 V (AC-adaptor) |
| Current Consumption | 6 mA (9 V) / 7 mA (10 V) |
| Dimensions (whole) | 74 mm (W) x 124 mm (D) x 54 mm (H) |
| Weight | 580 g |
