Audient RM1 Reference Microphone for iD Audio Interfaces
Audient - RM1 Reference Calibration Electret-Condenser Microphone for iD Audio Interfaces
Email me when the availability or price changes
Finance this product
- Spend over £280.00 and Buy Now, Pay Later or spread the cost of your finance over 24-48 months with a 10% deposit.
Reference Microphone for iD Audio Interfaces
Audient - RM1
Hear your mix. Not your room.RoomTune Monitor Correction measures how your room changes the sound of your monitors, then corrects it on your iDMK3 interface. The RM1 Reference Microphone is how it listens. It’s included with iD2+ and iD4+ and is available to purchase separately for iD1 and iD2. Your room changes what you hear. Some frequencies build up, others disappear. A mix that sounds right at your desk falls apart in the car or on a friend’s speakers. RoomTune measures your monitors in your space and corrects them on your iDMK3 interface, so you can trust the decisions you make.
330ΩImpedance
20Hz – 20kHzFrequency Response
125dBMax SPL
Ultimate Accuracy
Built-in correctionRuns on the hardware with zero CPU cost, always on from the moment your monitors power up.
Guided setup from start to finishSetup in iD Control takes under twenty minutes.
Free with your iDMK3 interfaceRoomTune software is free with every iDMK3 interface.
Measures Your Room...
...and only your roomRoomTune can only correct what the microphone hears. A studio microphone colours sound, so RoomTune would end up correcting for the microphone as well as your room.
To fix this, every RM1 is individually measured at the factory and has its own RM1 frequency response profile. RoomTune applies it to every measurement, so it corrects only your monitors and your room.
Setup, Handled
You place the mic. RoomTune does the rest.During RoomTune setup, enter your RM1 serial number to load its RM1 frequency response profile.
RoomTune then dials in phantom power, mic gain, monitor level and latency compensation automatically, with no controls for you to set. Easy.
RoomTune Monitor Correction | Audient iD Desktop Range
The Tech Spec
| Features | Specification | Model | RM1 Microphone |
|---|---|
| Microphone Type | Electret-condenser |
| Transducer Type | MEMS |
| Frequency Response | 20Hz – 20kHz |
| Polar Pattern | Omni-directional |
| Output Impedance | 330Ω |
| Sensitivity | -40dBV/Pa |
| SNR | 65dBA |
| Dynamic Range | 105dB |
| Max SPL | 125dB SPL |
| Power Requirements | +48V Phantom Power |
| Connector Type | 3 Pin XLR |
| Weight | 54g |
