Corsair 8GB DDR4 Vengeance LPX 2133MHz Memory Kit 2x 4GB
8GB (2x4GB) Corsair DDR4 Vengeance LPX Black, PC4-17000 (2133), Non-ECC Unbuffered, CAS 13-15-15-28, XMP 2.0, 1.2V
Corsair Vengeance DDR4 8GB (2x4GB) 2133MHz Memory (Black)
CORSAIR DDR4 VENGEANCE LPX RAM
This dual packet of top-end memory brings 8GB of premium Vengeance LPX memory to your PC. If you prefer to fill two DIMM slots or are looking to save on some expense then this set of 2x4GB memory could be for you. It has sufficient density to deal with common computer uses such as gaming and word processing. The embedded speeds are toward the bottom-end of DDR4 but boast some of the fastest CAS latency in DDR4 technology, this means the RAM doesn’t have to wait as long between reading commands. Combining the CAS Latency with the Vengeance LPX heat-sink makes for a very reliable and fluent process.
Available in: RED DDR4 Vengeance LPX memory.
2133MHz
Speed
13-15-15-28
CAS Latency
1.2V
Voltage
8GB (2x4GB)
Capacity
MEMORY PERFORMANCE ADVANCEMENTS
Voltage
(Lower is better)
Density
(Higher is better)
Speed
(Higher is better)
DDR
DDR2
DDR3
DDR4
Experience the True Power of DDR4 RAM
It was 2007 that the DDR3 standard was announced and in the years since then technology has only been pushed further. Eventually the memory standard was pushed to the edge of DDR3 limits, until DDR4 smashed through those limits! Corsair DDR4 doubled the bandwidth and dramatically increase clock speeds, whilst consuming less power than ever before.
INSTALLING DDR4 MEMORY
Motherboard Socket DDR4 Optimization
Pin Out: 288
Vengeance LPX DDR4 form factor is optimized and compatibility-tested for the latest X99 and Intel 100 series motherboards, forging reliably fast performance. With any standard DDR4 DIMM memory socketed motherboard you shouldn’t have any trouble installing the powerful Vengeance LPX RAM and getting that DDR4 performance into your system.
LOW PROFILE MEMORY DESIGN
Corsair DDR4 Memory Size
The clever and stylish, low-profile design of DDR4 LPX memory means it can fit comfortably into much smaller spaces. The LPX series of Vengeance DRAM was prepared for when the first of the Micro ATX and Mini-ITX motherboards for DDR4 memory released. In any system that has minimal internal space the small form factor of the LPX DDR4 RAM from Corsair is ideal.
OVERCLOCKING DDR4 RAM
Unlock the Potential within DDR4
Corsair’s Vengeance LPX DDR4 has been built around high-performance overclocking. Each module from the LPX series utilizes highly-screened memory ICs and an eight-layer PCB, with further overclocking improvments through the efficient heat spreader that provides effective cooling. The eight-layer PCB system on these DDR4 memory sticks helps if your computer is trying to squeeze too much information into one layer, causing a significant rise in temperature which can create a multitude of issues.
VENGEANCE LPX HEAT SPREADER
Cooler Memory for Better Performance
The heat spreader on Corsair LPX DDR4 memory is made of pure aluminum, creating a faster heat dissipation and a cooler operation. Usually the overclocking overhead is limited by the operating temperature, but not for the Vengeance LPX. Due to the unique design of the heat spreader, the temperature is constantly lowered as heat is pulled away from the ICs and into your system’s cooling path. Not only does the heat spreader allow Vengeance LPX to perform better, but the aggressive yet refined form factor looks great in any system.
EASY XMP RAM OVERCLOCKING
Utilize XMP for Overclocking in Seconds
XMP 2.0 is supported by Vengeance LPX DRAM along with Intel 100 and X99 motherboards. Simply select XMP mode in the BIOS and it will automatically adjust to the fastest safe speed for the Corsair DDR4 Vengeance LPX. You’ll get amazing, reliable performance without lockups or other strange behavior. Enjoy trouble-free, automatic overclocking in seconds with the support of XMP 2.0.
