Scan code: LN36718 Manufacturer code: SST-FF141B

Silverstone 140mm Fan Grille & Filter Kit Magnetic with Dust Filtering

140mm Silverstone Fan Grille & Filter Kit Magnetic with Dust Filtering

Thumbnail 1 : Silverstone 140mm Fan Grille & Filter Kit Magnetic with Dust Filtering
Silverstone 140mm Fan Grille & Filter Kit Magnetic with Dust Filtering : image 1
Scan code: LN36718 Manufacturer code: SST-FF141B
£3.98Item overdue since 30 September 2021
Pre order
spend over £280 and Buy Now, Pay Later or spread the cost of your finance over 24-48 months with a 10% deposit.
Delivery Options
  • By DPD to your specified address. | £5.48 Receive SMS with one-hour delivery window Weekend, timed and European delivery options are available at checkout

    Have your parcel delivered by DPD to your specified address. Receive SMS with one-hour delivery window

    Weekend, timed and European delivery options are available at checkout
  • Collect instore Collect from our Bolton store, BL6 6PE | Free

    Order online, collect from our Bolton store (25-28 Enterprise Park, Middlebrook, Horwich, Bolton, BL6 6PE)

  • UPS and DPD Pickup Pickup from local convenience store | £4.79

    Collect your parcel from your newsagents, petrol stations and convenience stores

Services
  • 48HR REPLACEMENT If you need to return this item, your replacement will be dispatched within 2 working days of your product arriving back at Scan. More info
Product Overview Dust can be a computer system’s worst enemy as it has the potential to lower cooling performance or cause damage when left overly accumulated. But most fan filters are a hassle to install so SilverStone created an easy to use FF141 fan filter.

The FF141 has embedded magnet in its frame so it can be effortlessly attached to any steel chassis without tools. Its 140mm size is also compatible with most 120mm fan vents so it can be used in many places that require filtering. In addition to filtering dust, the FF141’s grille can reduce noise associated with air turbulence. So for those looking for dust reduction for component longevity with increased cooling efficiency, the FF141 is an excellent buy.

• Convenient magnetized design for easy installation
• Fine filter provides great dust reduction properties
• Compatible with most 140mm fans or vents Features Model No.
SST-FF141B

Colour
Black

Material
High density ABS / magnet

Application
140mm fan grille and filter kit

Net Weight
22g

Dimension
140 mm(W) x 140 mm(H) x 3 mm (D)
Warranty

Please note your statutory rights are not affected.

For further information regarding Scan's warranty procedure please see our terms and conditions

Details
Duration:
24 months
Type:
Return to base
DOA Period:
28 days
RTB Period:
12 months
Manufacturer Contact Details
Manufacturer:
SilverStone Technology GmbH
Telephone:
Carsten Buss Tel.: +49 40 675931-35
Loading Please Wait

Please wait . . .

140mm Silverstone Fan Grille & Filter Kit Magnetic with Dust Filtering is rated 5.0 out of 5 by 6.
Rated 5 out of 5 by from Good product. Bought a few of these from Scan, they are good quality and look perfectly ok over case fan openings.they also have small magnets on the underside for quick and easy removal. I've had a few purchases from Scan now, and highly recommend to anyone needing hardware for a PC project.
Date published: 2020-07-17
Rated 5 out of 5 by from Handy add on. I've had these filters a few weeks now, and already I've cleaned an appreciable amount of dust from them, which will hopefully keep my PC in top condition for longer. They have magnetic frames that attach them gently to the side of your PC tower, and come with screws, presumably so that you can fit them into a frame or cabinet that is non magnetic. My one and only issue is that they are not available in more sizes, I have one vent that is slightly smaller than 140mm, which is fine, but I also have two vents that are less than 50mm, and they are too far apart to be covered by a 140mm filter, a 140mm filter for such a small opening is overkill, two 140mm will fit over the small vents, but smaller ones would be a bit neater. Perhaps Scan could source and assemble a complete PC kit of vent filters?
Date published: 2016-02-10
Rated 5 out of 5 by from Superb it fits my fans grill perfectly simple item but simply brillant
Date published: 2015-07-29
Rated 5 out of 5 by from Blocks Dust It's a fan filter; it stops dust collecting in your system. If you have intake fans, you should cover them with this. It's magnetic too, so any case should be serviceable with these filters.
Date published: 2015-06-26
Rated 5 out of 5 by from Great filtration, easy to use These fan filters have a fine mesh that has great filtration properties without restricting air flow. The magnetic mounts are great, enabling you to take the fan filter off for regular cleaning. If you wish to mount it with screws however, there are holes, and the filter comes with 4 fan screws just in case. Look no further.
Date published: 2015-02-27
Rated 5 out of 5 by from Filters yer air ;) Does the job as intended, catches lots of dust and fluff, magnets are strong enough enough to hold them in place on a side panel (even when removing the panel from the pc they still didn't fall off), run a hoover nozzle over them to clean them. Job done :) Here is a pic of them in place on my Corsair Carbide 300R case
Date published: 2014-05-29
  • y_2020, m_9, d_10, h_15
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.12
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_6
  • loc_en_GB, sid_36718, prod, sort_[SortEntry(order=FEATURED, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_scan