Bitspower

10/13mm (3/8"-1/2") Water Cooling Hose Fittings

Fittings are a critical component in a watercooling loop as they secure the flexible tubing between the various components, such as the blocks, pump, reservoir and radiator. The fittings in this category are designed to secure 10/13mm (3/8"-1/2") tubing and pre-threaded for easy installation.

View:
Tekspek An in-depth guide into tech: Watercooling Overclocking System Noise Reduction

13/19mm (1/2"-3/4") Water Cooling Hose Fittings

Fittings are a critical component in a watercooling loop as they secure the flexible tubing between the various components, such as the blocks, pump, reservoir and radiator. The fittings in this category are designed to secure 13/19mm (1/2"-3/4") tubing and pre-threaded for easy installation.

View:
Tekspek An in-depth guide into tech: Watercooling Overclocking System Noise Reduction

360mm Radiators & Accessories

The radiator, when combined with one or more fans helps to conducts heat energy from the fluid in the watercooling loop into the air away from your PC. The larger the surface area the more effective the cooling, although some radiators are so thick they will only perform well with special fans that have a very high static air pressure to move air between the fins of the radiator. The radiators in this category require at least three 120mm fans to cool adequately.

View:

CPU Water Blocks

Most of the water blocks here can be strapped to almost any CPU, including Intel and AMD processors, but it's important to check the socket you're using is compatible. They vary in their materials and colours, so you can easily match them to your system's aesthetics.

View:
Tekspek An in-depth guide into tech: Watercooling Overclocking System Noise Reduction

Hard Drive & Solid State Drive Coolers

Maximise the performance of your HDD or SSD. Coolers allow you to keep high performance SSDs or HDDs operating at their best.

View:

Hardline Acrylic Tubing

Acrylic tubing is non-flexible. As well as cutting, it requires manual bending, but the end result of straight lines and sharp angles is visually stunning and it's available with special finishes too. Pay attention to the internal and external diameters measure up so you know the length you need.

View:

Hardline Tubing Tools & Accessories

In this category you'll find all the various tools required to measure, cut and bend your acrylic tubing to the perfect size and angles.

View:

Other Hose Fittings, & Adapters

These products enable to easily add a fill port to your waterloop loop. When mounted at the highest point of a loop it allows you to easily fill and top-off the fluid, without having to dismantle your PC. Fill ports are not necessary, but make maintaining a watercooled PC much easier than a loop without one.

View:
Tekspek An in-depth guide into tech: Watercooling Overclocking System Noise Reduction

Water Cooling Reservoirs

Reservoirs are not technically necessary, but are highly recommended. They increase your loop's fluid capacity and provide a convenient place to monitor water levels, add fluid or bleed air. Many can also be housed inside a spare 5.25in bay. This category also includes tubes, caps and other accessories.

View:
Tekspek An in-depth guide into tech: Watercooling Overclocking System Noise Reduction