Topping CL101 Studio Condenser Microphone (Black)
Topping - CL101 Professional Grade Cardioid Condenser Microphone - Black
Studio Condenser Microphone
Topping - CL101
(Black)
capture stunning detailThe Topping CL101 features an advanced cardioid polar pattern that ensures you no longer need to worry about small directional differences when recording. It separates the vocals from backrgound noise and captures only the intended sound within the heart-shaped range. If it's for recording or live streaming, the CL101 maintains a pure sound quality, avoiding unwanted feedback and interference noise. Record as intended, even in noisy environments. The large gold-plated capsule captures every subtle nuance when recording both instruments or vocals. A built-in soft silicone shock mount stabilizes the capsule to minimize mechanical noise.
With a lower equivalent noise level of just 4 dB SPL (A-weighted), the CL101 offers ultra-clean and pure recordings. Its 136 dB wide dynamic range ensures faithful reproduction of warm vocals and intricate instrument tones without distortion. Thanks to its flat frequency response - the CL101 delivers a sound signature that's warmer than most condenser microphones. The 20 Hz - 20 kHz wide frequency range ensures exceptional low-end depth and high-frequency extention. If it's at your home studio or on the go - the CL1010 offers professional-quality audio recording, anytime, anywhere.
140 dBMax SPL
20 Hz - 20 kHzFrequency Response
20 mV/PaSensitivity
At A Glance
• Cardioid Polar Pattern
• 34mm Fully Gold-Plated Capsule
• Unlimited Recording Scenes
• Ultra-Low Noise
• Compact Size
What's Included?
• Topping CL101 microphone
• Shock mount
• Pop filter
• Carry case
The Tech Spec
| Features | Specification | Dimensions | Ø48 mm x 126 mm |
|---|---|
| Weight | 405g |
| Colour | Black |
| Connectivity | 3-pin male XLR connector |
| Type | Condenser, externally polarized |
| Diameter of diaphragm | 1" |
| Diameter of capsule | 34 mm |
| Acoustic operating principle | Pressure gradient transducer |
| Polar pattern | Cardioid |
| Frequency response | 20 Hz - 20 kHz |
| Sensitivity | 20 mV/Pa |
| Max SPL | 140 dB |
| Equivalent noise level | A-weighted: 4dB SPL |
| Internal noise level | A-weighted: <0dB SPL |
| Dynamic range | 136 dB |
| Electrical impedance | <68 Ohms |
| Recommended load impedance | >1K Ohms |
| Power requirements | 48 V ±4 V (P48, IEC 61938) |
| Current consumption | 5.0mA |
