Scan code:
LN87054
Manufacturer code:
UT-899CAT6AFPL02
Scan CAT6a Single Gang Dual Port Facplate Tool Less
Scan CAT6a Single Gang Dual Port Shielded Loaded Faceplate Tool Less
Scan code:
LN87054
Manufacturer code:
UT-899CAT6AFPL02
spend over £225 and Buy Now, Pay Later or spread the cost of your finance over 24-48 months with a 10% deposit.
Delivery Options
- By DPD On 20th Jun 2019 to your specified address. | £5.48 Receive SMS with one-hour delivery window Weekend, timed and European delivery options are available at checkout
- Collect instore Collect from our Bolton store, BL6 6PE | Free
- UPS and DPD Pickup Pickup from local convenience store | £4.79
Product Overview
A single faceplate pre-assembled with Cat6a pass-through shielded clip in euro modules (50 x 25mm).The Cat6a modules are toolless type and colour coded making installation of cables easier.
These faceplates come with screws and cable ties to hold the module firmly around the cable. The module can fit cables with a variety of diameters due to an adjustable cable clamp.
The faceplate is designed for 86mm x 86mm back boxes and are available with one or two Cat6a modules.
Please note: Not compatible with deep back boxes but will work with 45mm back boxes if the cable uses rear cutout.
Features • 2 removable Cat6a modules
• Tool-less design
• Spring shutter
• Screws supplied
These faceplates come with screws and cable ties to hold the module firmly around the cable. The module can fit cables with a variety of diameters due to an adjustable cable clamp.
The faceplate is designed for 86mm x 86mm back boxes and are available with one or two Cat6a modules.
Please note: Not compatible with deep back boxes but will work with 45mm back boxes if the cable uses rear cutout.
Features • 2 removable Cat6a modules
• Tool-less design
• Spring shutter
• Screws supplied
Scan CAT6a Single Gang Dual Port Facplate Tool Less
![Scan CAT6a Single Gang Dual Port Facplate Tool Less]()