RODE VideoMic PRO- R Short Shotgun Mic
RODE VideoMic PRO- R Compact Shotgun Directional On Camera Microphone
|Instalment Rate:||14.9% p.a. (fixed)|
|Cost of purchase:||£149.00|
|Total inc. interest:||£160.50|
Purchase Rate: 19.9% p.a. (variable)
Representative: 19.9% APR (variable)
Assumed Credit Limit: £1,200Subject to status. Terms and Conditions apply.
By DPD On 30th Nov To 4th Dec
to your specified address. |
Receive SMS with one-hour delivery window
Weekend, timed and European delivery options are available at checkout
Have your parcel delivered by DPD to your specified address. Receive SMS with one-hour delivery windowWeekend, timed and European delivery options are available at checkout
Collect from our Bolton store, BL6 6PE |
Order online, collect from our Bolton store (25-28 Enterprise Park, Middlebrook, Horwich, Bolton, BL6 6PE)
UPS and DPD Pickup Pickup from local convenience store |
Collect your parcel from your newsagents, petrol stations and convenience stores
Protect against installation damage for 28 days.
ScanProtect is an enhanced warranty specifically designed and offered by Scan to reduce the risk of any mishap or damage to components during installation.
Our aim with ScanProtect is to encourage our customers to upgrade or build their own PC confidently. For a small additional fee our customers are provided with complete peace of mind.
At the heart of the VideoMic Pro is an all-new 1/2" condenser capsule that provides broadcast-quality audio via a 3.5mm minijack connector (outputting the mono signal to both left and right channels) with an incredibly low self-noise of just 14db. A super-cardioid polar pattern ensures that surrounding audio is minimised, and your recording is focused on the subject in front of the camera.
The integrated Rycote® Lyre® based shock mounting system separates the VideoMic Pro capsule and electronics from its mount, providing isolation from external physical factors that may cause unwanted rumble and vibrations in the microphone. Constructed from a single piece of hard-wearing thermoplastic, the Lyre® provides superior acoustic suspension to traditional elastic solutions, and will never wear out, sag or snap.
Easily accessible on the rear face of the microphone are the power, filter and level controls. In addition to the microphone's native 40Hz-20kHz response a selectable high-pass filter at 80Hz is available, which will prevent low end noise such as air conditioners and traffic from being recorded.
Below these controls are the level settings, which attenuate or boost the recorded level as required. The -10dB level attenuation (or PAD) is ideal for recording loud sound sources, such as live music, motorsport, or interviews where the subject is very close to the camera. The +20dB level boost is designed for use with DSLR cameras, allowing the user to reduce the camera's preamp level (or mic-input level), effectively reducing the amount of noise generated by the camera's comparatively low quality audio circuitry.
The microphone uses a standard sized shoe mount for on camera use, and features a 3/8" thread in the base of the mount for easy boom pole mounting.
The VideoMic pro is battery powered, and provides over 70 hours recording from a single 9V battery.
The RØDE VideoMic is designed and made in Australia, and covered by RØDE Microphones' industry leading 10 year warranty. Features • Rycote® Lyre® shock mounting onboard
• All new capsule with lower noise and higher sensitivity
• Broadcast recording quality condenser microphone
• Compact form factor (150mm/6” length)
• Ultra lightweight (85g/3oz)
• 9V battery powered - over 70 hours use (alkaline)
• Integrated shock mounting
• Integrated foam windscreen
• 3.5mm stereo mini-jack output (dual mono)
• T wo step High Pass Filter (flat, 80Hz)
• Three position level control (-10dB, 0, +20dB)
• Camera shoe mount with 3/8” thread for easy boompole mounting
• 10 year warranty with online registration at www.rodemic.com/warranty
• Acoustic Principle: Line Gradient
• Active Electronics: JFET impedance converter
• Capsule: 0.50"
• Address Type: End
• Frequency Range: 40Hz - 20kHz(selected HPF @80)
• Output Impedance: 200O
• Maximum SPL: 134dB SPL (@ 1kHz, 1% THD into 1KO load)
• Maximum Output Level: 6.9dBu (@ 1kHz, 1% THD into 1KO load
• Sensitivity: -32.0dB re 1 Volt/Pascal (20.00mV @ 94 dB SPL) +/- 2 dB @ 1kHz
• Equivalent Noise Level (A-weighted): 14dB-A
• Weight: 85gm
• Dimensions: 100mmH x 75mmW x 170mmD
|Polar Pattern (Direction)||
|Sensitivity||-32.0dB re 1 Volt/Pascal (20.00mV @ 94 dB SPL) +/- 2 dB @ 1kHz|
|Frequency Response||40Hz - 20kHz(selected HPF @80)|
|Wired / Wireless||Wired|
|Connectors||1 x 3.5mm TS Jack - Mono (Male)|
|Including Shock Mount||Yes|
|Including Pop Shield||No|
|Including Mic Clip||No|
|Model Number||VIDEOMIC PRO-R|
Please note your statutory rights are not affected.
For further information regarding Scan's warranty procedure please see our terms and conditions
- 120 months
- DOA Period:
- 30 days
- RTB Period:
- 12 months
All RØDE Microphones are covered by a limited warranty for one (1) year from the date of purchase.This warranty can be extended to ten (10) years from the date of purchase. To be eligible for the extension of the warranty, the original purchaser must register the purchase of their RØDE Microphone online. The terms and conditions of the original warranty will then apply for the term of the extended warranty period.
For the RØDE M1 live dynamic microphone only, this warranty can be extended to the lifetime of the product from the date of purchase. To be eligible for the extension of the warranty, the original purchaser must register the purchase of their RØDE M1 live dynamic microphone Microphone online at www.rode.com. The terms and conditions of the original warranty will then apply for the term of the extended warranty period.
RØDE Microphones 5 Year Limited Replacement Warranty - Terms and Conditions All RØDE Microphones are covered by a limited warranty for one (1) year from the date of purchase.This warranty applies only to the RØDE HS1, RØDE Pin Mic and RØDE Lavalier microphones.This warranty can be extended to five (5) years from the date of purchase. To be eligible for the extension of the warranty, the original purchaser must register the purchase of their RØDE Microphone online at www.rode.com. The terms and conditions of the original warranty will then apply for the term of the extended warranty period.