Magewell 2 Channel Pro Capture Dual HDMI HD PCIe Card

Product Overview Two channel HD capture card with 2x HDMI + 2x embedded audio.

Features:
• PCIe 2.0 Interface
• Capture 2k x 2k 60Hz
• Compatible with Windows
• Compatible with Linux
• 1080p/720p Up/down Scaling
• Deinterlacing
• Multiple Streaming
• Automatically Detecting Input Signal
• 4:4:4 10bit High-fidelity Video Processing Pipeline
• Color Adjustment
• Various Output Color Spaces
• SG-DMA Transmission Mode
• Multiple Devices on One Host
• Hardware Time Stamp
• Mounting Hole
• Rotary Switch
• DDR3L High-speed RAM Memory
• LED Indicator
• Rev 1.15 Firmware Upgrade
• Common Driver
• Continuously Work for 24h x7 Features Technical Specifications

Supported OS
• Windows 7/8/8.1/2008/2008 R2/2012 (x86 & x64)
• Linux (V4L2 kernel driver source code under NDA, supports x86, x64 & arm architecture)

Supported APIs
• Windows: DirectShow, DirectKS, Wave API/DirectSound/WASAPI
• Linux: V4L2, ALSA

Supported Software
• VLC, VirtualDub, OBS, xSplit, vMix, VidBlaster, Wirecast, Microsoft Media Encoder, Adobe Flash Media Encoder, Any other DirectShow/V4L2 encoding/streaming software

Input Interfaces
• 2x HDMI type A
- DVI 1.0
- HDMI 1.4a

Output Interfaces
• PCIe Gen2 x4

Input Features
• Support for input video resolutions up to 2048×2048 pixels

HDMI Specific Features
• 225MHz HDMI receiver
• Adaptive HDMI equalizer support for cables lengths up to 30M
• Support for customized EDID
• Support for extraction of AVI/Audio/SPD/MS/VS/ACP/IRSC1/ISRC2/Gamut InfoFrames
• Full colorimetry support
• Support for 8/10/12-bit color depths
• Support for RGB 4:4:4, YCbCr 4:4:4, YCbCr 4:2:2 color sampling
• Support for up to 8-channel IEC60958/IEC61937 audio streams
• Support for extraction of audio formation information & channel status data
• Support for extraction of video timing information
• Support for extraction of 3D format information
• Support for extraction of Sony/Canon DSLR time code

Video Output Formats
• Support for output image resolutions up to 2048×2048 pixels
• Support for output frame rates up to 120fps. (Actual output frame rate can be limited by PCIe bandwidth, and at higher image resolutions – above 1280×1024 – by the pixel clock of the on-board video processing hardware. eg. Max frame rate at 1920×1080 = ~80fps. )
• Support for 4:2:0 8-bit output formats: NV12, I420, YV12
• Support for 4:2:2 8-bit output formats: YUY2, YUYV, UYVY
• Support for 4:4:4 8-bit output formats: V308, IYU2, V408, BGR24, BGR32
• Support for 4:4:4 10-bit output formats: V410, Y410
• More output formats are supported via Pro Capture SDK for DirectKS

Video Processing Features
• Two video processing pipelines with ~180Mpixels/s processing bandwidth for each one
• Full 10-bit video processing
• Video cropping
• Video scaling
• Video de-interlacing
- Wave
- Blend top & bottom field
- Top field only
- Bottom field only
• Video aspect ratio conversion
- Auto or manual selection of input aspect ratio
- Auto or manual selection of output aspect ratio
- Three aspect ratio conversion modes: Ignore (Anamorphic), Cropping or Padding (Letterbox or Pillarbox)
• Video color format conversion
- Auto or manual selection of input color format & quantization range
- Auto or manual selection of output color format, quantization range & saturation range
- Support for RGB, YCbCr 601, YCbCr 709, YCbCr 2020 color formats
- Support for Limited or Full quantization range
- Support for Limited, Full & ‘Extended gamut’ saturation range
• Video frame rate conversion
• Video OSD composition
- Support for PNG OSD image (up to 2048×2048)
- Support for dynamic loading of RGBA OSD image via SDK

Multiple Cards per System
• Support for multiple cards plugged to one system
• On-board rotary switch to set card number, with 16 positions from 0 to F
• System hardware device tree will display “01: Pro Capture AIO” when rotary switch is set to 1, and so on
• The video and audio device names displayed in your software will include the card number (set by the rotary switch)

Multiple Output Streams
• Unlimited output streams for any one input channel
• Independent cropping, aspect ratio, color format, resolution, frame rate, de-interlacing and color adjustment settings for each individual stream

Ultra Low Latency Support
• Latency of 64 video lines
• Partial notification mode in SDK

Timestamp & A/V Synchronization
• Hardware based 100ns high resolution clock
• Audio frames (192 audio samples) & video frames are stamped with hardware clock
• Hardware clock can be synchronized across cards (via SDK)

Video Output SG-DMA
• ~700MB/s per channel DMA bandwidth in PCIe 2.0 system
• ~400MB/s per channel DMA bandwidth in PCIe 1.0 system
• Support for auto detection of Intel tiled GPU surface
• Support for DirectGMA for AMD video adapter chipsets
• Support for GPUDirect for Nvidia video adapter chipsets

SDK
• Pro Capture SDK for DirectShow for easy integration (Windows)
• Pro Capture SDK for DirectKS for maximum flexibility & performance (Windows)

Windows Driver Tweaks
• All options can be controled by three levels of registry key: global level, product level and device level
• Video, Audio, Crossbar filter names can be customized via registry keys

Firmware Upgrade
• Multiple cards in one system can be upgraded simultaneously
• Cards can be upgraded without a system power shutdown (In most cases, even a reboot is not needed)

LED Indicator
• Status LEDs indicate the working state of each channel: idle, input signal locked, memory failed or FPGA configuration failed.

Form Factor
• Low profile PCIe x4 Add-on Card
• 115.99mm x 68.88mm (without PCI bracket)

Accessories
• Low Profile Bracket

Power Consumption
• Max current at 12V ~0.9 A
• Max current at 3.3V ~0.6 A
• Max power consumption ~12.8 W

Working Environment
• Operating temperature: 0 to 40 deg C
• Storage temperature: –20 to 70 deg C
• Relative Humidity: 5% to 90% non-condensin