Icon AirMon Pro RX Wireless Audio Reciever
Icon - AirMon Pro RX Wireless Audio Reciever, 24-bit/96KHz Sampling Rate, Type C USB Rechargable
Email me when the availability or price changes
Finance this product
- Spend over £390.00 and Buy Now, Pay Later or spread the cost of your finance over 24-48 months with a 10% deposit.
- SCANPROTECT Protect against installation damage for 28 days.
Wireless Audio Reciever
Icon - AirMon Pro RX
Sleek, compact and stylish designThe AirMon Pro RX is a receiver that can be used as an extension to an existing AirMon Pro setup. The system can be expanded with an unlimited number of receivers per transmitter. Up to three transmitters can be used at close range, but this depends on the Wi-Fi strength. The AirMon Pro has a very low latency time. The signal is transmitted digitally via 2.4 GHz. The available sampling rates are 32K, 48K (16-bit mono) or 96K, with the latter offering the best audio quality, namely a 24-bit stereo signal. This monitor system is ideal for podcasters and musicians alike. It is also robustly built and its compact design makes it easy to attach to a shirt or belt.
6 HoursBattery Life
2400MHz-2483MHzOperating Frequency
24-bit/96KHzSampling Rate
Amazing features
• Uncompressed digital transmission up to 24-bit/96KHz sampling rate
• 2.4GHz proprietary encryption technology for ultra-low latency wireless transmission (less than 1.58ms)
• Uniquely innovative technology allows the user to select transmission sample rate from 32K, 48K MONO or 96K STEREO
• Type C USB connector for charging (cable included)
• Rechargeable battery for both transmitter and receiver
• 6 hour battery life (approximate) for continuous operation
The Tech Spec
| Features | Specification |
|---|---|
| Audio - Receiver | Sampling bit rate 96KHz: 24bit 48KHz: 16bit 32KHz: 16bit Channel Mode 96KHz: STEREO 48KHz: MONO 32KHz: MONO Output Level: 16mW Output Impedance: 32 ohm |
| Radio Frequency - Receiver | Operating Frequency: 2400MHz-2483MHz Digital Modulation: GFSK Occupied Bandwidth: 4MHz +4MHz Receiving Sensitivity: -85dBm Selectable Channel: 16 channel |
| Power - Receiver | Current consumption: 90mA Power Requirements: Built-in rechargeable LiPo battery charged via USB 5V, 0.5A Battery Operating Time: 11 hours for 1000 mA use |
| Dimensions and Weights - Receiver | Dimensions (WxDxH): 44mm x 61mm x 21mm (1.7"x2.4"x0.8") Weight: 41g Accessory: USB Recharing cable and storage pouch |
