HYTE X50 Dual Chamber Mid Tower Mesh Case Taro Milk Purple
End Of Life
HYTE X50 Dual Chamber Mid Tower Mesh Case Taro Milk Purple
Scan code: LN165407 Manufacturer code: CS-HYTE-X50G-TM
End Of Life
  • Thumbnail 1 : HYTE X50 Dual Chamber Mid Tower Mesh Case Taro Milk Purple
  • Thumbnail 2 : HYTE X50 Dual Chamber Mid Tower Mesh Case Taro Milk Purple
  • Thumbnail 3 : HYTE X50 Dual Chamber Mid Tower Mesh Case Taro Milk Purple
  • Thumbnail 4 : HYTE X50 Dual Chamber Mid Tower Mesh Case Taro Milk Purple
End Of Life

HYTE X50 Dual Chamber Mid Tower Mesh Case Taro Milk Purple

HYTE X50, Dual Chamber Mid Tower, Taro Milk, Acoustic Glass, ABS Mesh, USB 3.2 Gen2x2, mITX / mATX / ATX / E-ATX

Scan code: LN165407 Manufacturer code: CS-HYTE-X50G-TM
End of life
This product is no longer available to purchase. See our suggested alternatives below.

Suggested Alternatives

X50 Dual Chamber Mid Tower Mesh Case in Taro Milk from HYTE

X50 Chassis

Total Defiance There’s a playful boldness to the HYTE X50 at first glance—its rounded edges, the lifted stance, the continuous curves—but beneath that friendly silhouette sits a serious dual-chamber layout built for oversized hardware. Instead of a typical screwed-in side panel, HYTE uses a hinged 4 mm laminated acoustic glass door that lifts upward in one smooth motion and wraps elegantly around the chassis. The result is a futuristic, almost otherworldly aesthetic paired with the kind of instant access that makes building and tweaking feel genuinely effortless. The whole design feels playful at first, but the engineering is confidently thought through.

430mmMax. GPU Card Length

ATX / E-ATX / MicroATX / Mini-ITXMotherboard Form Factor

170mmMax. CPU Cooler Height

Mid TowerForm Factor

Impressive Cooling

X50  Airflow

Micro-Mesh Front IntakeA full micro-mesh front surface feeds cool air straight into the chamber with low restriction. The uniform pattern keeps noise controlled while delivering a steady column of fresh intake for front-mounted fans and radiators.

Louvered Blade VentingThe patent-pending louver system guides warm air out with assertive directionality. Each angled blade disrupts heat buildup and maintains airflow momentum, while the metal structure adds stiffness to the surrounding panels.

Cold-Floor Airflow PathThe bottom chamber accepts up to three 120 mm fans—even thicker models—creating a direct stream of cool air aimed at the graphics card. Long, triple-slot GPUs stay at comfortable temperatures thanks to this focused lower intake.

Build a Clean Machine

X50 Component Space

Structural PSU CanopyThe power supply sits beneath a rigid shroud that doubles as a routing corridor. Tie-downs are aligned for clean cable paths, and HYTE includes Velcro straps inside and outside the compartment so builders can keep lines tight and disciplined.

Expanding on Expansion SlotsEven the expansion slots break from convention. Instead of rigid plates, the rear panel uses open structural bars that look almost otherworldly, and they serve a real purpose: letting hot air escape freely so the exhaust fan doesn’t have to fight against unnecessary resistance.

Hardware HeadroomThe X50 accommodates E-ATX motherboards up to 10.6 inches wide, GPUs up to 430 mm long and 160 mm tall, and CPU coolers up to 170 mm—ample space for top-tier components. Power supplies up to 223 mm slot in with room to spare beneath the canopy.

All the Space You Need

X50 Expansion

Storage & Expansion LayoutTwo 2.5-inch drive placements and a 3.5-inch bay cover the essentials for SSD-heavy builds. Seven full-size horizontal expansion slots support multi-card layouts and oversized GPUs without congestion. A mechanical power switch anchors the front I/O with a satisfying click, complemented by a 3.5 mm audio combo jack, two USB 3.2 Gen 1 Type-A ports, and a USB 3.2 Gen 2x2 Type-C port for high-speed external devices.

Warranty

Please note your statutory rights are not affected.

For further information regarding Scan's warranty procedure please see our terms and conditions

Details
Duration:
24 months
Type:
Return to base
DOA Period:
14 days
RTB Period:
1 months
Manufacturer Contact Details
Manufacturer:
HYTE
Buying Guide
Not sure which case is right for you? Read our Case Buying Guide
HYTE X50 Dual Chamber Mid Tower Mesh Case Taro Milk Purple
HYTE X50 Dual Chamber Mid Tower Mesh Case Taro Milk Purple