CiT Destroyer Black Mid Tower Tempered Glass PC Gaming Case

CiT Destroyer Black ATX Gaming Case

The CiT Destroyer is a uniquely designed PC Gaming Case with an angular front forming into a stylish 70% tinted tempered glass front panel. The angled sides leading to the TG front are vented, allowing cool air to flow in, and also showcase the LED lighting from the included 6 x ARGB Fans. The TG side panel has a 30% tint to showcase your ARGB fans and key components while adding a touch of class.

We have made it even easier to control your ARGB fans with two different ways available to you. The Destroyer includes a 6-Port Hub controlled via either your Reset/LED Switch or Aura Sync. You can use the amazing colours the chassis has to offer thanks to the LED button, once the SATA is connected or use the ARGB motherboard connector and have access to even more striking colours. Once connected to a compatible motherboard you can customise your lighting using mobo software. Please note the CiT Destroyer is only compatible to work with motherboards that have a 5V RGB 3 Pin connection.

Moving onto the top of the case the I/O panel provides varied connectivity support with USB3.0 and USB2.0 connections and inside the Destroyer we have included a 6-port ARGB fan hub with controls for your LED lighting and have access to approximately 26 LED modes or to have access to 16.8 million colours using a compatible addressable RGB Motherboard or the Reset/LED switch on the top I/O panel.

This completely black interior has smart build potential with a spacious interior offering wide support for a range of gaming hardware to build a powerful effective gaming PC. It can fit a graphics card up to 34cm in length, CPU Cooler up to 16cm in height and can hold 2 x 2.5" and 2 x 3.5" drives. An ATX power supply unit measuring up to 200mm will fit inside.

Improve the overall performance of the Destroyer by taking advantage of the smartly designed interior, excellent build quality and flexible storage options with room for up to a 360mm radiator, 4 hdds and support for higher end hardware.

Stylish Destroyer: - The CiT Destroyer is uniquely designed with an angular front forming into a stylish 70% tinted tempered glass front panel. The angled sides leading to the TG front are vented, allowing cool air to flow in, and also showcase the LED lighting from the included 6 x ARGB Fans. The tempered glass side panel has a 30% tint to showcase your ARGB fans and key components while adding a touch of class. The tempered glass is surrounded by black interior for that classic look.
Six ARGB Fans with Powerful Airflow: - Your components have never been easier to keep cool with six ARGB fans included & fitted you are ready to go straight out of the box. The Destroyer can also fit an extra two fans and supports installing an AIO water cooler with room to fit a 120mm, 240mm or 360mm radiator at the front of the case.
6-Port Hub Included & Fitted: - The Destroyer includes a fitted 6-Port Hub, allowing you to control your fans & lighting via either your Reset/LED Switch or Aura Sync for complete control options.
Motherboard Sync: - You can now take your colour customisation to new levels with the included Hub ARGB motherboard connector, simply connect the 3 Pin to a compatible motherboard and you can use the mobo software to sync your fans and have access to even more eye-catching LED lighting.
Manual Fan Control: - The Destroyer's built-in 6-Port Hub can be controlled directly from your Reset/LED Switch, allowing full manual control even without an AURA compatible motherboard.
Tempered Glass Panels: - A solid 4.0mm tempered glass front panel with 70% tint and an edge to edge 4.0mm tempered glass side panel with 30% tint are included with the Destroyer, allowing the user to show off their finished build and the glow from the included ARGB fans.
Full-Length Vented PSU Shroud: - To keep the interior looking neat and tidy the Destroyer has a dedicated PSU Shroud that is made with solid steel vented panelling that perfectly covers the cables and showcases the PSU specs, as well as allowing decent airflow in the chassis.
ATX Housing: - Standing at 445mm high, 195mm wide and 385mm deep the Destroyer is compatible with a wide range of components, with 340mm of clearance for GPUs and it can facilitate CPU coolers up to 160mm tall. There are seven expansion slots on the rear panel for PCIe devices. Plenty of room for high-end builds.
I/O Panel: - Providing you with a varied connectivity support, the Destroyer has a fully equipped I/O panel featuring one USB 3.0, two USB 2.0 and HD Audio, as well as an LED button (Reset Switch).