CiT Pro Creator XR Mid-Tower ATX White PC Case

CiT Pro Creator XR Mid-Tower – White

The Pro Creator range is designed to exceed boundaries, with its high airflow design that helps to unlock CPU and GPU performance by keeping components cool. The front panel is made of ultra-fine metal mesh that combines high-airflow performance and excellent dust filtration. The spacious interior of the Creator XR is ready for powerful gaming setups, offering space for 360mm radiators in the front, top and side of the chassis as well as multiple hard drive locations.

Stylish Aesthetics

The Creator XR has a smooth and elegant exterior with a metal mesh front panel and tempered glass panelling. Providing a solid base, the main body of the chassis is made from 1.0mm SPCC steel.

Metal Mesh Front Panel

Designed to improve the overall airflow of your system, the Creator XR front panel is made using metal mesh, allowing air to flow into the case easily without obstruction. This helps to facilitate more air flowing through the chassis, whilst providing space for RGB products to be seen.

Case Panelling

The design of the standard metal mesh and tempered glass panels are made using an easy slot-in pin design, making it easy to remove and gain access to the interior of the chassis.

Optimum Cooling

A total of ten fan slots provide flexibility and adaptability when configuring your cooling setup. The front panel can house up to three 120mm or 140mm fans, the side panel supports three 120mm fans, with the top supporting three 120mm or two 140mm fans and the rear having space for one 120mm fan. For water cooling setups, the front, top and side panels are able to accommodate radiators up to 360mm for peak cooling performance.

ATX Housing

Standing at 506mm high, 235mm wide and 482mm deep; the Creator XR interior is effectively designed to support a wide range of components, including ATX Motherboards with 430mm of clearance for GPUs and CPU coolers up to 180mm tall. There are seven expansion slots on the rear panel for PCIe devices. The dedicated PSU shroud can hold power supplies up to 315mm long and is made with solid steel panelling that perfectly covers the cables and contains a hard drive mount. The shroud has the capability to fit 2 x 2.5” SSDs or 2 x 3.5” HDDs. Featuring an I/O panel including two USB 3.0, one USB Type-C & two 3.5mm jack and a dedicated power, reset & LED button.

Tempered Glass Side Panel

The sleek tempered glass panel adds a premium finish and offers a completely unobstructed view of the interior, your hardware components and any RGB lighting.

Dust Filtration

On the front and bottom panel there is a removable dust filter, preventing dirt or dust from entering the chassis and ensuring a clean environment.

USB Type-C Port

The Creator XR includes a USB Type-C with up to 10Gbps transfer speeds.

• Motherboard Support: ATX/mATX/mITX.
• Max GPU Length: 430mm
• Max CPU Cooler Height: 180mm.
• Standard ATX PSU – up to 315mm.
• 1 x USB 3.1 Type-C, 2 x USB 3.0, 1 x HD Audio, 1 x Microphone.
• Seven Expansion Slots.
• Up to four 2.5” internal drives (or three 3.5” drives).