Audeze LCD MX4 Planar Magnetic Headphones
Audeze LCD-MX4 - Over-Ear Headphones, Lightweight Magnesium Housing, Carbon Fibre Headband, 5Hz - 20kHz, 20 Ohms
By DPD On 20th Feb 2019
to your specified address. |
Receive SMS with one-hour delivery window
Weekend, timed and European delivery options are available at checkout
Have your parcel delivered by DPD to your specified address. Receive SMS with one-hour delivery windowWeekend, timed and European delivery options are available at checkout
Collect from our Bolton store, BL6 6PE |
Order online, collect from our Bolton store (25-28 Enterprise Park, Middlebrook, Horwich, Bolton, BL6 6PE)
Introducing the LCD-MX4
The Audeze LCD-MX4 is the ultimate studio headphone, designed following consultation with many of the world's finest mix and mastering engineers.
The concept is relatively simple, to combine the "mastering suite" type tonal balance of the LCD-X Diaphragm, favoured by the likes of Manny Manequin (Kanye West, John Mayer) and Stuart Hawkes (Ed Sheeran, Adele) with the exquisite detail of the (Bob Katz's favourite) flagship LCD-4 model, but make them lighter than the LCD-4, so are easier to wear for long mix sessions.
Audeze have become world renowned as the headphone for "A-List" Producers and mix engineers, gathering many high profile fans of the brand, such as Ken Andrews ( Nine Inch Nails, Paramore), TMS (Little Mix, Professor Green) and James Reynolds (Tinie Tempah, Ellie Goulding), who never had never had headphones in their mixing workflow until they tried Audeze.
It is common for mastering engineers to comment that the Audeze's are actually more accurate and have finer detail than their mastering grade monitors in a fully treated room.
The MX4 is of course powered by Audeze's patented Fluxor magnets, focusing 1.5 Tesla of magnetic flux on the lightweight 20 ohm impedance diaphragm. The low impedance means that although we do advise that this is used with a high-quality dedicated headphone amp such as Audeze's own Deckard, Chord Hugo, SPL Phonitor Mini, Rupert Neve RNHP or an interface such as the RME ADI-2 Pro or one of the Antelope range, it is perfectly possible to power the LCD-MX4 from any standard laptop or interface output to a good working level.
A dedicated amp will give the benefit of lower THD, increased dynamic range and signal to noise ratio, improved frequency response and extra headroom for the super sharp transient response that it delivers without distortion.
The LCD-MX4 headphones' new lightweight design includes a durable magnesium housing with a carbon fiber headband. At 30% lighter than the LCD-4 model, the new MX4 is prefect for long mixing sessions and hours of critical listening.
• Premium leather for style and durability
• Flux density 1.5 Tesla
• Large ultra-thin Uniforce diaphragms
• Double Fluxor™ magnetic arrays
• 1/4in to dual 4-pin mini-XLR Premium LCD Headphone Cable
• Professional travel case
• Style: Open circumaural
• Transducer type: Planar magnetic
• Magnetic arrays: Double Fluxor™ magnets
• Magnet type: Neodymium
• Transducer size: 106 mm
• Maximum power handling: 15W (for 200ms)
• Sound pressure level: >130dB with 15W
• Frequency response: 5Hz – 20kHz extended out to 50kHz
• Total harmonic distortion: <1% through entire frequency range
• Impedance: 20 ohms
• Efficiency: 105 dB / 1mW
• Optimal power requirement: 1 – 4W
|Headphone Type||Open Back|
|Headphone Connector Type||6.35mm Jack|
|Cable Length||2.5 m|
Please note your statutory rights are not affected.
For further information regarding Scan's warranty procedure please see our terms and conditions
- 36 months
- Return to base
- DOA Period:
- 30 days
- RTB Period:
- 12 months