Scan code:
LN64902
Manufacturer code:
LCD-ROD-EXT
Official Audeze LCD Extension Yoke Rods
Audeze LCD Extension Yoke Rods, 1" Longer than Standard Yokes, Extend 3.5", Enables earpad to extend further around head
Scan code:
LN64902
Manufacturer code:
LCD-ROD-EXT
spend over £225 and Buy Now, Pay Later or spread the cost of your finance over 24-48 months with a 10% deposit.
Delivery Options
- By DPD On 28th Jun 2019 to your specified address. | £5.48 Receive SMS with one-hour delivery window Weekend, timed and European delivery options are available at checkout
- Collect instore Collect from our Bolton store, BL6 6PE | Free
- UPS and DPD Pickup Pickup from local convenience store | £4.79
Product Overview
Like the originals... just longer.
Occasionally we receive customer feedback that Audeze headphones fit a bit too snug. As a result, Audeze offers 1” longer custom-machined yoke rods that allow the earpads and drivers to extend farther around the head.
These 3 ½” extended yoke rods, like our standard yokes, are fabricated from aluminum in limited runs by a computer-controlled lathe.
The process is as follows:
• Before each run trained machinists calibrate the computer numerical controlled (CNC) lathes
• CNC lathes are programmed, set, and run through trials to ensure consistent quality
• CNC milling uses cutters that precisely remove material via rotating rods
• Cutting rods are tumble-finished to smooth and polish any rough surfaces
• A surface finishing process called passivation strengthens the yoke rods and protects them from corrosion
• A trained supervisor double-checks the parts
If you’ve wished your Audeze headphones were a little bigger or looser-fitting, Audeze goes the extra step to assure your comfort. Features • 3 ½” long (compared with 2 ½” for the standard pin)
Occasionally we receive customer feedback that Audeze headphones fit a bit too snug. As a result, Audeze offers 1” longer custom-machined yoke rods that allow the earpads and drivers to extend farther around the head.
These 3 ½” extended yoke rods, like our standard yokes, are fabricated from aluminum in limited runs by a computer-controlled lathe.
The process is as follows:
• Before each run trained machinists calibrate the computer numerical controlled (CNC) lathes
• CNC lathes are programmed, set, and run through trials to ensure consistent quality
• CNC milling uses cutters that precisely remove material via rotating rods
• Cutting rods are tumble-finished to smooth and polish any rough surfaces
• A surface finishing process called passivation strengthens the yoke rods and protects them from corrosion
• A trained supervisor double-checks the parts
If you’ve wished your Audeze headphones were a little bigger or looser-fitting, Audeze goes the extra step to assure your comfort. Features • 3 ½” long (compared with 2 ½” for the standard pin)
Official Audeze LCD Extension Yoke Rods
![Official Audeze LCD Extension Yoke Rods]()