Product Overview
Excellent Cooling Perfomance
A 92 mm PWM fan, 50 fins, 2 copper heatpipes in combination with pre-applied MX-4 high peroformance thermal compound provide excellent cooling performance and improve heat transfer from the CPU. In a test conducted by Svet Hardware, the Freezer 11 LP successfully reduced the CPU temperature of an Intel Core i5-661 by 19 degrees.
Virtually Silent
Its low noise impeller and patented fan holder ensures the fan to work quietly even under full load. PC Tuning showed us that the Freezer 11 LP is 16 dBA lower than the second best low profile cooler in the test they did, the Cooler Master Vortex 752.Thanks to the PWM control, the fan speed adjusts according to the CPU temperature and thus the noise level remains at an absolute minimum which qualifies it as a silent cooler.
Slim and Lightweight
With a height of only 52.5mm and the capability to draw air in from the side, the Freezer 11 LP is an extremely slim CPU cooler that fits into every HTPC and low profile computer. Its light weight limits the stress on the motherboard to a minimum and makes it absolutely transport safe.
Wide Compatibility
The Freezer 11 LP features wide compatibility with Intel sockets. Its simple mounting system is designed to fit most of the current CPU platforms. The Freezer 11 LP is compatible with Intel Socket 1150, 1151, 1155, 1156, 775.
Quick Installation
The unique mounting system via push pins offers excellent stability and is applicable within minutes. Thanks to the pre-applied ARCTIC MX-4 high performance thermal compound, a quick and clean installation is guaranteed!
Features
• Very quiet.
• Lightweight.
• Easy to install.
Compatible with Intel Socket
• 1150, 1151, 1155, 1156, 775.
Arctic Freezer 11 LP Low Profile CPU Cooler, 1x 92mm PWM Fan, Aluminium Fins, 2x Copper Heatpipes, Intel is rated
4.5 out of
5 by
13.
Rated 4 out of
5
by
DarkArchitect from
Great low cost low height cooler.
I have bought six of these so far and installed them in 2U rack cases which they fit in with ease. Measurement of CPU temperatures over a couple of weeks show them, to be very effective products. They might a first seem a little fiddly to fit but a bit of playing with the mounting makes you realise how easy it actually is. I only mark down for quality as out of the twenty four mounting screws one would not engage well with the mounting bracket. This was easily resolved but had it been the first and only one I had purchased I might not have bought any more which would have been a shame. They also come very well packaged.
Date published: 2020-07-16
Rated 5 out of
5
by
projectreboot from
Good budget build
We are a charity that builds gaming pcs on a budget for households on a limited income. This cooler is one of the parts we buy in as we mainly get our parts from business donated machines. We used this cooler in our latest build, it was easy to install and is very quiet, it was paired with a 3rd gen i5 and under load kept the temps just where we expected them to be. We would highly recommend this cooler, a definite 5 stars.
Date published: 2020-02-28
Rated 5 out of
5
by
haash from
Good budget option
If you want something a bit better than the Intel cooler but lack height this is a good option.
Date published: 2020-01-20
Rated 5 out of
5
by
Rudders from
Great piece of kit
I replaced the original intel CPU cooling fan which was getting old and noisy with this, the Arctic Freezer 11LP and I am so glad I did. I turned the CPU fan speed down to level 1 on my motherboard and set it ramp up at 60c. This cooler is so effective that the CPU ticks over 33-34c and never goes 50c even when working hard. I am so pleased with this cooler and at this price you can't go wrong.
Date published: 2018-09-24
Rated 4 out of
5
by
AnonymousGamer from
Cheap Cooler for great performance
This cheap cooler kept my i7 cooler than the arctic circle. It's price makes this one of the cheapest coolers in the market with the capability to keep even high end processors cool. It's slim and small dimensions makes it perfect for smaller builds and the fan is fairly quiet.
Date published: 2017-10-29
Rated 4 out of
5
by
DanielCoffey from
Very good for its price and easy to fit
I bought this small cooler because I needed a temporary cooler to help diagnose some issues with a water-cooled system and it was effective for that purpose.
The fitting bracket is all plastic. Four small plastic push pins go through the board, the bracket is put on next and you have to pay attention to the orientation if you have capacitors near the CPU. Four plastic wedges are next to secure the bracket top the board. Because the cooler is very lightweight, this is adequate.
The heat sink comes with some pre-applied thermal compound and the amount is somewhat generous. When I came to remove the cooler after my fault finding, there was significant excess compound to be cleaned off. It is the usual thick, grey stuff and the ArctiClean 1+2 kit was just what was needed.
Please note that there is one fitting issue not mentioned in the leaflet. This cooler MAY NOT FIT on certain ASUS motherboards with the ROG shield. The plastic shield gets in the way of the heat pipes on the cooler. Once the shield is removed, the cooler fits perfectly. I had this issue on my ASUS Maximus IX Formula board when the ROG shield was fitted.
Date published: 2017-10-21
Rated 4 out of
5
by
aasdf from
good stuff
kept my cpu about 5 to 6 degrees cooler than the stock intel fan. fit well inside my fractal design 202 case and i like the look of it.
Date published: 2017-03-11
Rated 5 out of
5
by
Ryan97 from
Does the job
Works well, no issues at all, keeps my CPU from getting too toasty
Date published: 2017-01-16
