WD 2TB Red Plus NAS 3.5" SATA HDD / Hard Drive

Performance, Reliability and Power Efficiency

WD Red Plus internal HDDs are designed to handle workloads for power users and small to medium business NAS environments. WD Red Plus drives deliver the speed and capacity required to store, protect and share growing amounts of data in mid-sized RAID-optimised NAS systems with increased power efficiency.

Tuned for NAS with NASware™

Western Digital’s exclusive NASware™ technology fine tunes drive parameters to match NAS system workloads which helps increase performance and reliability.

Optimised for Lower TCO

WD Red Plus drives are engineered to use less power (versus previous models) and run cooler, which reduces operating costs and helps reduce heat in thermally challenged NAS boxes.

Designed for Continuous Operation

Since your NAS system is always on, a reliable drive is essential. WD Red Plus hard drives are designed for systems that operate 24x7, giving users the confidence of knowing they can reliably access their data.

Powered for Strong Performance

Despite using less power, the drives have plenty of bandwidth to handle the mixed performance demands of multi-drive NAS systems.

Tested for Dependable Compatibility

Western Digital partners with a wide range of NAS system vendors for extensive testing to ensure compatibility with most NAS enclosures.

Balanced for Increased Reliability

Hard drives that are not properly balanced may cause excessive vibration and noise in multi-drive systems, which could reduce hard drive life span and degrade the performance over time. Our enhanced dual-plane balance control technology significantly improves balance and increases overall drive performance and reliability.

Desktop Drives vs. WD Red® Plus

It is important to choose a drive purpose-built for RAID-optimised NAS systems to ensure optimum performance and preserve your valuable data. Take the following into consideration when choosing a hard drive for your NAS:

• Compatibility: Unlike desktop drives, WD Red Plus hard drives are specifically designed and tested for NAS and include NASware™ technology which fine tunes drive parameters to match NAS system workloads for optimum performance.

• Reliability: Desktop drives aren’t typically designed for the demands of an always-on NAS environment. WD Red Plus hard drives are designed to perform under tough conditions encountered in high-intensity 24x7 multi-user NAS environments.

• RAID Ready: WD Red hard drives are engineered with RAID error recovery control to help reduce failures within multi-bay NAS systems, unlike most desktop drives that are configured for generic use.

• Noise and Vibration Protection: Designed to operate solo, desktop drives typically offer little or no protection from the noise and vibration present in a multi-drive system. WD Red hard drives include Rotation Vibration (RV) sensors that anticipate and proactively counteract disturbances caused by increased vibration often found in multi-bay NAS systems.

• Capacity: 2 TB.
• Form Factor: 3.5-Inch.
• Transfer Rate: up to 175MB/s.
• Disk Speed (RPM): 5400 RPM.
• Cache Size: 64MB.
• Endurance (TBW): 180TB/Year.
• Operating Temperature: 0°C to 65°C.
• Non-Operating Temperature: -40°C to 70°C.
• Certifications: BSMI, ICES-003/NMB-003, CE, FCC, KC, Maghreb, RCM, UKCA, VCCI, CB-Scheme, TUV, UL.