AKASA AK-FN059 HDB Viper Fan - High performance S-FLOW blade PWM fan inc rubber mounting pins
The Viper fan creates more focused airflow providing blind-spot cooling, which makes it an ideal solution for a case or heatsink fan. HDB (Hydro Dynamic) bearings extend fan life and further enhance noise reduction. Killer Viper yellow colour makes this fan distinctive and unique. Features • High performance 12cm fan in killer VIPER yellow colour
• S-FLOW fan blade design delivers 30% higher airflow
• Super silent with PWM auto speed control
• Hydro Dynamic Bearing extends fan life up to 50,000 hours
|Fan Depth||25 mm|
|Fan Speed||1900 rpm|
|Sound Level||28.9 dB|
|Manual Speed Controller||No|
Please note your statutory rights are not affected.
For further information regarding Scan's warranty procedure please see our terms and conditions
- 36 months
- DOA Period:
- 28 days
- RTB Period:
- 12 months
- +44 (0)20 8578 0055
Date Issued: 20th Oct 2008
The modern PC is potentially a mass of heat output and heat production hot spots. With CPUs rated at more than 100W of heat output, single graphics boards carrying similar ratings (and people want to run two!), multiple hard drives the norm, lots of memory and mainboards covered in heatpipes to combat toasty core logic and PWM circuits, a PC appreciably warming up a room when it’s working hard is no joke.
Date Issued: 19th Jun 2008
Watercooling for the PC has been around for years in some form or another, for at least as long as Scan have been in business, with basic physics defining why you want to use it. That means for air cooling, to cope with increasing temperature in the heatsink you need to move the air across it faster. That is why thermostatically controlled fans in your PC will turn faster the hotter something gets.
Date Issued: 5th Mar 2007
Anybody who has been near their share of computer systems will appreciate that not all systems make the same amount of noise. There are a number of reasons for why this is so. Firstly, a computer makes noise for different reasons. Generally, anything mechanical is going to make noise.