EK-Loop OmniLink Pump SATA PWM D-RGB 100mm Signal Splitter Cable
100mm EK-Loop OmniLink Pump SATA PWM D-RGB Signal Splitter, Micro-fit to 1x Molex, 1x SATA, 1x 4-Pin PWM, 1x 3-Pin D-RGB
Email me when the availability or price changes
Finance this product
- Spend over £390.00 and Buy Now, Pay Later or spread the cost of your finance over 24-48 months with a 10% deposit.
- SCANPROTECT Protect against installation damage for 28 days.
- 48HR REPLACEMENT If you need to return this item, your replacement will be dispatched within 2 working days of your product arriving back at Scan.
EK-Loop OmniLink Pump SATA PWM D-RGB Signal Splitter
EK-Loop OmniLink Pump SATA PWM D-RGB Signal Splitter cable allows users to connect D-RGB LED devices, SATA powered pumps and 4-Pin PWM fans to the OmniLink cable harness using their standard connectors. The OmniLink cable allows for an easy transmission and distribution of +12V and +5V Power; PWM, TACHO, and D-RGB signals. The cable features a stylish black ribbon cable for easy build integration and cable management.
EK-Loop OmniLink Pump SATA PWM D-RGB Signal Splitter cable is compatible with all EK OmniLink products, PWM fan/pump speed control technology, and all popular D-RGB sync technologies from major motherboard manufacturers (if the header is supported).
Only the PWM 2 signal is accessible with this OmniLink splitter cable, which is intended to control the pump speed. For the PWM2 signal to work, the EK-Loop OmniLink 6-Pin Power (dual PWM) cable must also be used. It's primarily used for adding a distro plate/combo into omnilink and consolidating all of the connectors into the harness.
For PWM2 signal to work, EK-Loop OmniLink 6-Pin Power (dual PWM) cable must be also used.
PLEASE NOTE:
• If EK-Loop FPT fans are placed at the start of the OmniLink series, it limits the current to 4.5A due to the thinner wire gauge of the cable.
Features
• Molex Micro-fit 3.0 8-pin Male connector to:
1x Molex Micro-fit 3.0 8-pin Female Connector
1x SATA Power Female Connector (Ground, +12V)
1x 4-Pin PWM 2 Fan Male Connector (Ground, +12V, TACHO, PWM)
1x 3-Pin D-RGB LED Female Connector (+5V, Data, Blocked, Ground)
• Cable length: 250±10mm
• Colour: Black
• Power Wire gauge: AWG20
• Signal Wire gauge: AWG22
• Molex Micro-fit Connector current rating: 8.5A
• Power Cable current rating: 8A
• Signal Cable current rating: 6A
