EK-Loop Hard Tube Pre Bent 6pcs 12mm 0.8m Acrylic
0.8M EK-Loop Hard Tube, Pre Bent 90°, 12mm OD, 10mm ID, 6pcs, Clear, Acrylic
Email me when the availability or price changes
Finance this product
- Spend over £390.00 and Buy Now, Pay Later or spread the cost of your finance over 24-48 months with a 10% deposit.
- SCANPROTECT Protect against installation damage for 28 days.
- 48HR REPLACEMENT If you need to return this item, your replacement will be dispatched within 2 working days of your product arriving back at Scan.
Frequently Bought Together
EK-Loop Hard Tube Pre Bent 90°
EK-Loop Hard Tube 12mm 0.8m Pre-Bent 90° - Acrylic (6pcs) is a 6-pack of 10/12mm (ID/OD) acrylic tubing bent to a 90-degree angle with a tubing length of 250mm and 550mm on either side of the bend. Intended to help liquid cooling beginners, but also bring a quality of life improvement for liquid cooling enthusiasts by shortening the time and effort needed to bend the tubing and build the systems.
It comes in a length of 0.8m (800mm) which can be easily cut and shortened to an adequate length for any tubing run. It is mandatory to chamfer the edges of a freshly cut tube in order to prevent gasket (O-ring) damage.
Features
• Material: Extruded acrylic
• Inner diameter: 10 mm
• Outer diameter: 12 mm
• Total length: 800 mm
• Bend Angle: 90°
• Bend Radius: R20
• Length per axis: 550x250mm
