VPG SIM Mission Sim Steering Wheel + Simucube 3 Pro + Link Hub + Quick Release Bundle

VPG SIM Mission Sim Steering Wheel

Mission Sim was designed without inherited architecture, legacy constraints or real-car compromises. It commands attention with a fully integrated 5" touchscreen display, 118 individually controllable LEDs, 52 physical inputs. all within a compact 290mm platform weighing only 1300g.

Every surface, every input, every component is engineered with intent. This is the Mission Sim.

Every Input Within Reach

60 physical inputs are positioned around the natural driving position, allowing fast adjustments without unnecessary hand movement under load. Rear-mounted buttons are integrated directly into the aluminium rear cover, enabling critical changes while maintaining steering input through cornering, braking and close racing situations. Every control was positioned to feel immediate, intuitive and consistent under pressure. Fast where it matters. Intuitive where it counts.

Your Settings, Your Way

Mission Sim integrates 118 individually controlled LEDs across buttons, encoders, RPM telemetry, multi-switches and logo lighting, fully configurable through SimHub and Daniel Newman Racing Plugin. A new electronics architecture, high-speed processor and redesigned connectivity platform were developed to support the demands of Mission Sim’s 5" touchscreen display, telemetry and lighting systems under sustained load. Because performance is not just about what you feel, it is about what you can rely on.

Engineered Around Response

At 1300g, Mission Sim is the lightest sim wheel built around a fully integrated 5" touchscreen display. Lower rotational mass allows force feedback detail to transfer through the wheel with greater precision, preserving clarity and response under load. A full display system, advanced lighting architecture, rear-mounted controls and USB pass-through functionality are integrated within a compact 290mm aluminium structure engineered for stiffness and precision.

The Parts You Do Not See

Mission Sim integrates with the latest generation of VPG Console software, supporting advanced input mapping and up to 128 programmable digital inputs through the redesigned Magic Function architecture. The integrated Power Health tool monitors USB stability and power delivery in real time to help maintain consistent system performance under sustained load. USB pass-through ready. SimHub compatible. DNR LED profile compatible. Because the parts you never see are often the parts you rely on most.

Simucube 3 Pro Direct Drive Wheelbase

The Simucube 3 Pro represents the next evolutionary step in high-end sim racing hardware - a flagship direct-drive wheelbase designed to deliver unmatched realism, precision, and responsiveness. Engineered in Finland and manufactured within the EU, this wheelbase transforms steering from a gaming accessory into a fully professional racing instrument. Leveraging newly developed industrial-grade servo motors, an advanced force-feedback control algorithm, and a redesigned quick-release and usability system, the Simucube 3 Pro offers a deeper, more intuitive connection to the virtual car than ever before. With 25Nm of peak torque, contactless communication for supported wheels, telemetry-driven detail, and long-term reliability built into every component, this is the new benchmark for competitive sim racers seeking uncompromising performance and long-lasting build quality.

Precision, Power and Pure Racing Feel

The Simucube 3 Pro uses a new-generation SPM servo motor tailored specifically for sim racing - engineered to deliver 25Nm of torque with exceptional smoothness and responsiveness. Combined with Simucube’s refined active control algorithm and per-unit digital-twin calibration, this wheelbase ensures that even the tiniest surface detail, weight shift, or tyre vibration is communicated with lifelike clarity. Thanks to telemetry-based effects such as ABS, RPM feedback, engine vibration, and traction-loss detail, the driving experience feels sharper and more cohesive, enabling natural reflex-based control and heightened confidence in every scenario.

Advanced Motor Technology & Efficiency

The heart of the Simucube 3 Pro is a purpose-built industrial-grade servo motor designed exclusively for Simucube. This new motor platform improves response speed, efficiency, thermal performance, and sustained smoothness under load. With less internal inertia and enhanced rotational accuracy, steering inputs remain clean, fluid and precise - even during long races or when running high torque settings. This provides professional-grade performance that reacts instantly to driver commands, elevating competitive consistency and driving refinement.

Industry-Leading Quick Release System

Simucube’s next-generation quick release design sets a new standard for durability and usability. The Conical P3G Polygon locking interface eliminates play while maintaining silent, secure operation under extreme force loads - all without relying on pins that can wear, break or be misplaced. Paired with the contactless LightBridge system, Simucube Link wheels receive inductive power and optical data transmission, enabling display screens, LEDs and button inputs to function without batteries or charging. Instant connection, seamless interaction, and frictionless wheel swaps are all part of the experience.

Enhanced Usability & In-Sim Control

Every Simucube 3 model includes the new Control Box, allowing drivers to adjust settings, switch profiles, or wake devices without leaving the cockpit. With an on-screen overlay accessible directly in-sim, changes can be made effortlessly mid-race. The newly redesigned Simucube Tuner software streamlines configuration with clearer force-feedback controls, dynamic inertia and damping curve adjustments, automatic profile switching, smart defaults, and cloud-sharing options. Whether you’re new to high-end hardware or a seasoned pro, setup and fine-tuning are faster and more intuitive than ever.

Exceptional Build Quality & Longevity

Simucube has long been recognised for industrial-grade engineering, and the Simucube 3 Pro enhances this legacy. Every component - from the servo motor to the enclosure and quick release - is selected for longevity, structural integrity, and consistent performance across decades of use. Designed in Finland with meticulous attention to detail, this is hardware built not just for today’s racing, but for the long haul.

Simucube Link Hub

Simucube Link is a next-generation connectivity platform built for sim racing rigs - designed to unite all your Simucube hardware under a single, robust, low-latency network. Rather than relying on multiple USB ports and individual connections, Simucube Link uses a galvanically-isolated, real-time Ethernet-based protocol to link devices such as pedals, wheelbases, and wheels in a stable, efficient ecosystem. This unified architecture gives sim racers a secure, plug-and-play experience. With real-time data transmission and telemetry integration, Simucube Link ensures that game data, force-feedback signals, and device configurations are communicated reliably and with sub-millisecond latency - critical for immersive sim racing performance. The system is managed via the familiar Simucube Tuner software, giving you one central interface to configure, update firmware, and adjust settings across all connected devices. As Simucube expands its product line, Link provides a future-proof backbone for next-generation sim racing hardware.

Unified Connectivity for Complex Rigs

Simucube Link solves many of the limitations inherent in traditional USB-based connections for sim racing hardware. By consolidating all devices into a single USB-C port via the Link Hub, it reduces cable clutter and frees up ports for other peripherals. The galvanic isolation protects your gear from grounding issues, static discharge, or interference, significantly improving reliability and hardware safety - especially important for high-power devices like force-feedback wheelbases or active pedals. The real-time Ethernet protocol ensures sub-millisecond latency, so force-feedback, telemetry-driven effects, and responsive control reach your devices without delay. This makes Link ideal for both casual sim racers and competitive users who demand precision and consistency.

One Interface to Rule Them All

Simucube Link is more than a hub - it’s the backbone of a full sim racing ecosystem. The Link Hub acts as the central bridge between your PC and all Simucube hardware. Once connected, every compatible device will appear in Simucube Tuner automatically, allowing unified configuration and firmware updates with a single click. As new Simucube devices (wheelbases, wireless wheels, accessories) are released after 2024, they will integrate directly into the Link network - meaning you only ever need one Link Hub to expand your rig. This future-proof design ensures long-term compatibility and scalability, whether you run a simple pedal setup or a full cockpit with wheelbase, pedals, and telemetry-driven peripherals.

Built for Serious Sim Racing

Engineered for stability, low-latency, and safety, Simucube Link ensures that all data and power transfers across devices are consistent and interference-free thanks to galvanic isolation. This robustness is especially valuable when using high-power, force-feedback-driven hardware, where electrical noise or unstable connections could degrade performance or risk damage. With Link, you get a professional-grade communication standard that supports immersive telemetry effects, reliable power and data exchange, and a streamlined user experience. Whether for competitive sim racing or advanced sim training, Link provides the foundation for a stable, integrated, and expandable rig.

Simucube 50.8mm to 70mm Wheelbase Adapter

Easily attach third-party wheels to Simucube Link Quick Release with Simucube 50.8 mm to 70 mm Adapter. It adds 30 mm of clearance for shifters paddles and fully supports wireless data and power transfer with Simucube Link compatible wheels.

Extra Clearance

Wheels utilizing a 50.8 mm mounting pattern often position shifter paddles and other moving components closer to the center of the wheel. Simucube 50.8 mm to 70 mm Adapter moves the quick release 30 mm away from the wheel to avoid contact with any levers.

Flexible Wheel Mounting

Some steering wheels may utilize a 50.8 mm quick release mounting pattern, which Simucube Link Quick Release is not directly compatible with. To mount Simucube Link Quick Release and other 70 mm pattern quick release parts to these types of wheels we recommend using the Simucube 50.8 mm to 70 mm adapter.

Supports wireless power and data transfer

Simucube 50.8 mm to 70 mm adapter fully supports the wireless power and data transfer features of Link Quick Release when used with Simucube Link compatible wheels. The hollow construction allows Link Quick Release to be connected to a compatible wheel with easy access to the connectors.

VPG SIM Mission Sim Steering Wheel

• 290mm sim racing wheel with a fully integrated 5" touchscreen display, 60 physical inputs, and 118 individually controlled LEDs.
• Built around a compact aluminium structure weighing 1300g, with a carbon fibre front plate, aluminium rear structure, ergonomic grips, and full aluminium shifters and paddles.
• Features 60 physical inputs positioned around the driving position for fast adjustments during racing.
• Includes 12 APEM 650g front buttons, 2 rear Magic buttons, 2 funky switches, 4 thumb rotary encoders, 4 front rotary encoders, and a 12-position ELMA multi-switch.
• Rear-mounted controls are integrated into the aluminium rear cover for adjustments while maintaining steering input.
• The 5" touchscreen display is supported by a high-speed processor and redesigned electronics architecture for telemetry and lighting systems.
• Includes 118 individually controlled LEDs across buttons, encoders, RPM telemetry, multi-switches, and logo lighting.
• Supports LED configuration through SimHub and DNR LED profile compatibility.
• VPG Console support enables advanced input mapping and up to 128 programmable digital inputs through Magic Function architecture.
• USB pass-through ready with Power Health monitoring for USB stability and power delivery.
• Lower rotational mass helps transfer force feedback detail through the wheel with greater clarity and response.
• Aluminium knobs and button guards provide durable physical controls for frequent adjustments.
• Compatible with VPG Console software for input configuration and management.

Simucube 3 Pro Direct Drive Wheelbase

• 25Nm torque direct drive motor.
• New SPM industrial-grade servo motor platform.
• Active control algorithm with digital-twin calibration.
• Telemetry-based effects (ABS, RPM, traction, vibration).
• Conical P3G polygon quick release with zero play.
• LightBridge contactless wheel communication.
• Simucube Link compatibility with displays and LEDs always powered.
• Supports Simucube Wireless Wheels and standard USB wheels.
• Control Box included for in-sim adjustments and device control.
• Redesigned Tuner software with streamlined configuration.
• Easy mounting options, adapters and racing-ready bundle choices.
• Engineered in Finland; manufactured in the EU.
• Industrial-grade durability designed to last decades.

Simucube Link Hub

• Real-time Ethernet-based protocol with sub-millisecond latency.
• Galvanically-isolated network to eliminate interference and grounding issues.
• Unified device management with a single USB-C connection to your PC.
• Seamless integration of pedals, wheelbases, wheels, and future devices.
• Real-time telemetry and force-feedback data delivery to all devices.
• Future-proof compatibility for all Simucube hardware released after 2024.
• Simplified firmware updates and configuration through one software interface.
• Professional-grade stability, especially for high-power sim racing equipment.
• Reduced cable clutter and cleaner rig installation.

Simucube 50.8mm to 70mm Wheelbase Adapter

• Enables use of the Link Quick Release with third-party steering wheels using a 50.8 mm mounting pattern.
• Compatible with both threaded and non-threaded mounting holes.
• Acts as an additional 30 mm spacer for Link Quick Release to ensure sufficient clearance for shifter paddles.
• Wireless data and power transfer are supported with Simucube Link compatible wheels.
• Package weight: 0.29kg.
• Package dimensions: 11.5cm x 11.5cm x 7cm