NZXT H9 Flow Tempered Glass Dual Chamber Mid Tower with 3x F140Q Fans
Refurbished NZXT H9 Flow, Dual Chamber Mid Tower, Black, 3x 140mm F140Q Fans, Reverse Connection Ready, E-ATX, ATX
Email me when the availability or price changes
Finance this product
- Spend over £280.00 and Buy Now, Pay Later or spread the cost of your finance over 24-48 months with a 10% deposit.
- SCANPROTECT Protect against installation damage for 28 days.
- 48HR REPLACEMENT If you need to return this item, your replacement will be dispatched within 2 working days of your product arriving back at Scan.
Cool-Running, Clean-Looking
The H9 Flow (2025) is a case built with intent—from its industrial-grade steel chassis to its panoramic glass panels and airflow-first design. At first glance, it’s all clean lines and symmetry, but look closer and you’ll see where the design shifts into something more functional. Every panel, vent, and bracket serves a thermal or structural purpose. It’s not ornamental—it’s engineered.
Tough on the Outside, Tidy on the Inside
This is a dual-chamber mid-tower, and it uses that space intelligently. One side is for the show: motherboard, GPU, cooling hardware, all lined up behind wraparound tempered glass. The other side is for the work: PSU, cabling, SSDs—tucked behind steel panels, out of view, and out of the airflow path. The result is a layout that feels open and breathable, even when fully loaded.
Air Goes In. Heat Gets Out.
Airflow is the defining trait here. Three sides of the case are high-density mesh—precision-cut, ultra-fine, and sturdy enough to feel permanent. The mesh wraps the top, side, and a unique front-right intake zone, drawing air in with minimal resistance. These aren’t aesthetic flourishes. They’re oversized intakes and exhaust paths that turn the whole case into a pressure-balanced cooling tunnel. It’s quiet. It’s effective. It’s ready for serious thermal loads.
Front & Back Airflow
This setup is built for quiet, efficient airflow straight out of the box. Three 140mm F140Q (CV) fans handle intake duties with a focus on low noise and consistent pressure. These fans are tuned for smooth, low-RPM performance, giving you a strong thermal baseline without adding acoustic overhead. At the rear, a single F120Q (CV) fan completes the airflow path, keeping warm air moving without ramping up under load. No LEDs, no extra software—just a reliable cooling foundation that’s ready to scale with your hardware.
Dual-Chamber Done Properly
Cooling hardware fits easily into place. There’s support for two 420 mm radiators—one top, one side—as well as ten fan positions (nine for 140 mm, one for 120 mm). You can run triple-fan AIOs, full-loop water cooling, or high-performance air towers with no clearance issues. The chassis is deep, and the mounting options are generous.
One Side for Show, One Side for Strategy
Every part of the build process has been considered. Panels pop off without tools, including the top and front-right mesh sections, making access easy during setup or maintenance. Inside, wide cable routing channels, pre-installed Velcro straps, and an intentionally recessed rear chamber make it simple to keep the wiring out of the way—even with thick braided GPU cables or back-connect motherboards.
SSD Swaps Without the Hassle
Storage is just as tidy. A hinged SSD panel on the rear side swings open to reveal mounts for up to four 2.5” drives. No trays to fiddle with, no screws to misplace. Just a clean, tool-free system that keeps your drives accessible and secure.
Nothing Flimsy. Nothing Loose.
Durability comes standard. The steel frame has a reassuring weight to it—nothing flexes, nothing rattles. Paired with thick tempered glass and reinforced mounting points, this case is built to be opened, modded, and upgraded without feeling delicate.
Features
• Dual-chamber SGCC mid-tower PC case with 4 included NZXT Fans, BTF support and toolless DIY features.
• Supports dual 420 mm radiators and up to ten fans total (x9 140 mm, x1 120 mm).
• Extra-wide cable channels, Velcro straps, and tie-down points for cable management.
Motherboard Support: E-ATX, ATX, microATX, miniITX, Hidden Connector (ATX/mATX).
3x 140mm F140Q Intake Fans:
1350~150RPM / 100.25CFM / 1.4mmH2O / 22.9dBA
1x 120mm F120Q Exhaust Fan:
1350~150RPM / 60.2CFM / 1.05mmH2O / 24.1dBA
Front I/O: 2 x USB 3.2 Type-A, 1 x USB 3.2 Gen2x2 Type-C, 3.5mm Headphone/Mic Jack.
GPU Length: Up to 459 mm (with <56 mm thickness fans installed at the front-right) / Up to 410 mm (with 56 mm thick 420 mm AIO and fans installed at the front-right)
