(Open Box) Topping DX5II Amp and DAC Combo - Black
(Open Box) Topping - DX5II Fully Balanced DAC and Headphone Amplifier Combo - Black, 2x ES9039Q2M DAC Chips, 10-Band PEQ
Email me when the availability or price changes
Finance this product
- From £13.19 / month (APR 16.9%) for 24 months or 0% for 4 months
- Spend over £390.00 and Buy Now, Pay Later or spread the cost of your finance over 24-48 months with a 10% deposit.
- SCANPROTECT Protect against installation damage for 28 days.
(Open Box)
Fully Balanced DAC and Headphone Amp Combo
Topping - DX5 II (Black)
Please note: This is an open box product, packaging has been opened and demonstrated to a customer, but product is in as-new condition.
The Ultimate Listening Experience!The Topping DX5 II is a fully balanced DAC and headphone amplifier, fusing cutting-edge digital conversion with a powerful, versatile amplifier stage. This was designed as the successor to the original DX5, offering a range of upgrades while keeping the same compact, sleek, look that we know and love from Topping gear. At the heart of the DX5 II you'll find a pair of ESS ES9039Q2M DAC chips, one for each channel. This dual-DAC design provides outstanding transparency, ultra-low distortion, and a wide dynamic range, so that both headphones and speaker setups benefit from clean and detailed playback.
Please note: Some of the images used below are for display purposes only. This is the BLACK model.
133dBSNR
7600mW x 2 @16Ω THD+N<1%Headphone Output Power
10-BandPEQ
Amazing Features
• Dual ES9039Q2M DAC Chips
• 10-Band High-Precision PEQ
• X-Hybrid Headphone Amplifier Circuit
• Powerful 7600mW x 2 Output
• LDAC Wireless Supported
• Full-Colour Display
What's Included?
• Topping DX5 II Black
• Remote Control
• USB Cable
• 6.35mm to 3.5mm Adaptor
• AC Cable
• Bluetooth Antenna
• Product Information Card
Premium Components
Dual ES9039Q2MBoth left and right channels utilize and independent ESS new DAC chip (ES9039Q2M). This design delivers higher SNR, greater DNR, and lower distortion compared to the DX5, offering high-resolution audio performance.
X-Hybrid CircuitX-Hybrid represents a new technological breakthrough following NFCA architecture. Using an all-new triple-stage hybrid amplification design, this doesn't just retain the signature ultra-low distortion and high dynamic rage of the NFCA, but also achieves significantly improved efficiency by optimizing circuit topology - resulting in reduced staatic power consumption and heat generation. Despite its compact chassis, it houses a fully balanced, quad-channel amplifier.
wide adaption to headphonesDX5 II is equipped with 6.35mm single-ended, 4.4mm balanced, and 4-pin XLR headphone jack, meeting the needs from low to high sensitivity headphones and IEMs. With a low noise floor of just 1.8uVrms, even the most sensitive IEMMS are free of any background hiss. Delivering a powerful 7600mW x 2 output, DX5 II enables most headphones to reach thier full performance potential.
Sleek Topping Design
User-friendlyThe DX5 II features a 2" full colour screen and 3 buttons, allowing you to make quick and efficient adjustments to your settings. Choose from 9 different backround colours, FFT, VU or playback info display can also be switched with ease. The pressable knob supports customizable functions, allowing access to any output mode. Switch usage preferences in the settings as you wish. Bilingual switching between Chinese and English is also supported.
10-Band High-Precision PEQ Adjustment
fine-tuned frequenciesA brand new PEQ adjustmen supports ten customizable frequency band. This new PEW algorithm and desktop software allows you to fine-tune the frequency, gain and bandwith of each PEQ band. The software supports the import of target curves and raw curves and enables the curve compensation using the target curve. It can also save multiple profiles for easy switching. All outputs support independent PEQ configuration, and both headphones and speakers can be accurately adjusted as you wish.
Advanced Performance Features
LDAC wireless availableEquipped with a QCC5125 chip, the DX5 II supports Bluetooth 5.1 and can support up to 96kHz/24bit. It also fully supports LDAC/aptX-Adaptive/aptX/aptX HD/AAC/SBC and other audio encodings, allowing high-quality audio to be transmitted wirelessly to provide a musical experience beyond CD level.
Plug and playDX5 II features a wide range of compatibility and applies to various operatng systems such as Windows 10, Windows 11, MAC, Linux and iOS/Android. The USB hardware is based on third generation XMOS XU316 and Thesycon driver which is both stable and reliable. In addition, the USB input supports up to PCM768kHz/32bit and DSD512, which makes every detail vivid.
Self-developed IV CircuitryTopping's self-developed I/V conversion module is dedicated to achieving superior audio reproduction. The exceptional circuit design delivers lower distortion and noise while occupying less space. Pushing the boundaries of physical limits, this design extracts the maximum performance from the DAC chip.
Connect DirectlyDX5 II also features a "preamp" mode. In preamp mode, you can adjust the output volume of DX5 II, then connect it directly to a pure amplifier or active speaker without the need for a separate preamplifier. Both input and output interfaces of the DX5 II come with a volume memory functionality, enabling the device to automatically restore the last set volume when switching outputs - allowing a for a quick return to your familiar listening environment.
The Tech Spec
| Features | Specification | DAC Chip | ES9039Q2M X2 |
|---|---|
| THD+N @1kHz (A-wt) | <0.00006% |
| Amplifier Architecture | Fully Balanced Headphone Amp |
| SNR @MAX OUT 1kHz (A-wt) | 133dB @1kHz |
| Dynamic Range @1kHz (A-wt) | 133dB @1kHz |
| Headphone Output Power | 7600mW x 2 @16Ω THD+N<1% 6400mW x 2 @32Ω THD+N<1% 4300mW x 2 @64Ω THD+N<1% 990mW x 2 @300Ω THD+N<1% 490mW x 2 @600Ω THD+N<1% |
| PEQ | 10-band high-precision PEQ |
| Display | Full-Colour Display |
| 12V Trigger | Supported |
| UI | Aurora UI |
| Inputs | Bluetooth Input USB Input Coaxial SPDIF Input Optical SPDIF Input 12V Trigger IN/OUT (3.5mm Jack) |
| Outputs | Balanced XLR Output Single-Ended RCA Output |
| Dimensions (WxHxD) | 19cm x 4.4cm x 15.5cm |
| Footswitch I/O | 2 x 1/4" (GA-FC, Exp pedal) |
PayPal Credit
| Monthly Payment: | £24.47 |
| Instalment Rate: | 16.9% p.a. (fixed) |
| Cost of purchase: | £270.00 |
| Total inc. interest: | £293.53 |
| Monthly Payment: | £13.19 |
| Instalment Rate: | 16.9% p.a. (fixed) |
| Cost of purchase: | £270.00 |
| Total inc. interest: | £316.40 |
| Example | |
| Minimum Spend: | £99 |
| Instalment Rate: | N/A |
| Cost of purchase: | £99 |
| Total inc. interest: | £99 |
Representative Example:
Purchase Rate: 23.9% p.a. (variable)
Representative: 23.9% APR (variable)
Assumed Credit Limit: £1,200
Subject to status. Terms and Conditions apply.