NZXT Source 340 Mid Tower Case
• Grommet-less cable management bar keeps cables tidy with ease
• Full 280mm radiator support for the latest Kraken cooler
• Compact form factor coming in two inches below competing mid towers
• Detailed design and engineering with tons of small touches
• Very easy to build in for new and experienced users alike
• Integrated PSU shroud for an ultra clean build
• Fully filtered intakes
|Case Edition||Source 340 Black|
|Case Form Factor||Mid Tower|
|Motherboard Form Factor||
|Front/ Side/ Top Panel||
|Fans Included||2 x 120mm|
|Front Radiator Compatibility|
|Top Radiator Compatibility|
|Bottom Radiator Compatibility|
|Rear Radiator Compatibility|
|Side Radiator Compatibility|
|Power Supply Form Factor||ATX|
|Max PSU Length|
|Max CPU Cooler Height||161 mm|
|Max VGA Card Length||364 mm|
|Dimensions||200 x 445 x 432 (WxHxD mm)|
|Weight||7.05 kg (Approx)|
Please note your statutory rights are not affected.
For further information regarding Scan's warranty procedure please see our terms and conditions
- 24 months
- Return to base
- DOA Period:
- 28 days
- RTB Period:
- 24 months
Date Issued: 6th Jul 2011
There's more choice than ever before, but which computer case is right for you and which features should you look out for?
Date Issued: 20th Oct 2008
The modern PC is potentially a mass of heat output and heat production hot spots. With CPUs rated at more than 100W of heat output, single graphics boards carrying similar ratings (and people want to run two!), multiple hard drives the norm, lots of memory and mainboards covered in heatpipes to combat toasty core logic and PWM circuits, a PC appreciably warming up a room when it’s working hard is no joke.
Date Issued: 19th Jun 2008
Watercooling for the PC has been around for years in some form or another, for at least as long as Scan have been in business, with basic physics defining why you want to use it. That means for air cooling, to cope with increasing temperature in the heatsink you need to move the air across it faster. That is why thermostatically controlled fans in your PC will turn faster the hotter something gets.
Ask your questions. Share your answers.
I can confirm that the PCIe brackets/slots are held in by thumb screws, the version with the snap-off brackets was a review sample and was still in the making at the time of the reviews and it was not a consumer sample.
The 2 fans are installed, one in the back and one in the front if i remember correctly. There are two fan mounts at the front, one above the cpu area and one at the back.
This case supports two 2.5" SSD/HDD brackets near the motherboard area and has a 3.5" HDD cage that can hold 3 disk drives.
I'am sorry for my misuse of terms, i was getting mixed up with HDD and Optical drives, there is no space for one, but depending on how big/long your PSU is, you may be able to get one in there, but non accessible.
I hear some WC's can fit if you take off the Support bracket that operates cable management aswell but I would like to not do this if at all thank you.
Besides the support bracket my Hyper X Beast memory is the only other obstruction of course so I'm hoping the pump leads will reach the CPU fairly nicely.
The H80i will fit in the back or the front if you do not plan to push/pull fan configurations with the cooler. It should be able to push/pull in the back but you will have to remove the support bracket to do push/ pull in the front. But from my experience, the support bracket has VERY tight screws and is difficult to remove.
and psu 600W Corsair Builder Series CX, Non Modular, 80 PLUS Bronze
This will be able to fit you psu with enough room to route your cables around the back and as for your motherboard, it will be able to fit with far too much room as it is a Micro-ATX Motherboard where as this supports ATX at the largest, so yes it would fit but with a lot of room and it may look a bit odd.