Rated 4 out of 5 by 1
Rated 4 out of 5 by MikeBP Good little case
Case comes with:
1 x 2.5inch mounting against rear left side of case (between case and power supply). This will fit any thickness drive
1 x 2.5inch mounting under the slimline drive bay
1 x slimline drive bay.
If installing a slimline DVD then a adapter cable is required (such as AKASA AK-CB050 SATA Cable for Slimline Optical Drives (SATA+Molex to Mini SATA Power & Data)
A standard height CPU fan/heatsink (as on Intel Pentium G3420 roughly 50mm) will fit if no drive is installed in the 2.5inch mounting under the slimline drive. If you want to install a drive in this bay then you will need a low profile CPU cooler.
I ended up mounting first drive in rear left position and a second drive taped to the side of the power supply between the PSU and motherboard due to the above - the PSU power lead was long enough for the single 2 x SATA power lead to connect to both drives. Not sure the power lead would be long enough if mounting under slimline and at rear left - so a molex to sata adapter would be a good idea.
There is no card reader in this case
29 December 2013