Cooler Master Elite 130 Mini ITX Case

Cooler Master Elite 130 Black mini-ITX Cube Case with Full Size VGA Support 343mm, USB 3.0 w/o PSU (Std ATX)

Cooler Master
Scan code: LN53496 Manufacturer code: RC-130-KKN1 Request call
Spend over £225 and Buy Now, Pay Later or spread the cost of your finance over 24-48 months with a 10% deposit.
3xs Approved High End
Delivery options £5.48 By DPD On 27th Feb 2018 DPD Delivered to your specified address. Receive SMS with one-hour delivery window. £4.79 Collect from local shops UPS and DPD Pickup Collect your parcel from your newsagents, petrol stations and convenience stores. Free Collect Instore Q-Collect Place your order online and collect from our Bolton store with Q-Collect. Weekend, timed and European delivery options are available at checkout ScanProtect protection ScanProtect Protect against installation damage for 28 days.More
Frequently Bought Together
Product Overview One of the most compact, yet fully featured chassis for high performance M-ITX computing. Included is a large mesh front panel that offers reserved styling while allowing extreme airflow. It’s designed to fit in the most minute available desk space while supporting high performance hardware.

Elite 130 supports: the largest VGAs from NVIDIA or AMD, 5 x HDDs and/or SSDs, a full-sized power supply, and even a thick 120mm DIY or AIO watercooling radiator. Features • Unprecedented airflow for a Mini-ITX case with front mesh panel and vents on the top and side panels
• Dual Super Speed USB 3.0
• Supports a 120mm radiator in the front
• Supports standard length ATX PSU
• Supports ultra high-end graphics card up to 343mm / 13.5 inch, such as AMD HD7990 and NVIDIA GTX690
• Ample storage – up to 1 ODD, 3 HDDs and 4 SSDs:
• ODD x 1 + HDD x 2 + SSD x 1 or
• HDD x 3 + SSD x 1 or
• HDD x 2 + SSD x 3 or
• HDD x 1 + SSD x 4
Case Edition  
Case Form Factor Mini-ITX
Motherboard Form Factor Mini-ITX
Material Plastic / Steel
Front/ Side/ Top Panel
  • 1 x Headphone
  • 1 x Mic In
  • 1 x USB 2.0
  • 2 x USB 3.0
Drive Bays
  • 4 x 2.5" Internal
  • 3 x 3.5" Internal
  • 1 x 5.25" External
Expansion Slots  
Fan Bays
  • 1 x 120mm
  • 1 x 80mm
Fans Included
  • 1 x 120mm
  • 1 x 80mm
Front Radiator Compatibility  
Top Radiator Compatibility  
Bottom Radiator Compatibility  
Rear Radiator Compatibility  
Side Radiator Compatibility  
Window No
Power Supply Form Factor  
Max PSU Length  
Max CPU Cooler Height  
Max VGA Card Length  
Colour Black
Dimensions 240 x 205 x 377.5 (WxHxD mm)

Please note your statutory rights are not affected.

For further information regarding Scan's warranty procedure please see our terms and conditions

12 months
Return to base
DOA Period:
28 days
RTB Period:
12 months
Manufacturer Contact Details

Additional Notes:
2 Years Direct Manufacturers Warranty

Customers also bought
TekSpek Guides
Computer Cases
Computer Cases
Date Issued: 6th Jul 2011

There's more choice than ever before, but which computer case is right for you and which features should you look out for?

Read More

Chassis Airflow
Chassis Airflow
Date Issued: 20th Oct 2008

The modern PC is potentially a mass of heat output and heat production hot spots. With CPUs rated at more than 100W of heat output, single graphics boards carrying similar ratings (and people want to run two!), multiple hard drives the norm, lots of memory and mainboards covered in heatpipes to combat toasty core logic and PWM circuits, a PC appreciably warming up a room when it’s working hard is no joke.

Read More

Cooler Master Elite 130 Black mini-ITX Cube Case with Full Size VGA Support 343mm, USB 3.0 w/o PSU (Std ATX) is rated 4.8 out of 5 by 8.
Rated 5 out of 5 by from The most versatile compact option. THE DOWNSIDE. 1. Not much to look at. 2. Limited space for the CPU cooler. THE UPSIDE. 1. Air cooling is fine up to at least 60W TDP and there is space for a 120mm radiatior at the chassis front. 2. Space for a full length GPU with good air feed. 3. Uses standard size ATX PSU. 4. Can hold multiple drives including a full sized optical drive. 5. Well made.
Date published: 2016-05-28
Rated 4 out of 5 by from Nice exterior and good construction This is a good mini case but is time consuming and fiddly to build due to its size but well worth the effort. Would use again
Date published: 2015-12-04
Rated 5 out of 5 by from Small case with enough space for decent gaming rig If you are looking for a mini ITX case,this is the one.Its cheap,got space for a large graphic card build quality is good.You can put a large full size ATX power supply.I got my old Corsair HX1050 inside of this small case :) I recommend to use a liquid cooling like Corsair H55 for the cpu because psu sits just about 4cm above the cpu socket so there is not much space for the traditional cpu cooler.In front of the case is enough room for a thick radiator.I got Corsair H80 in my build (it about 40mm thick)in push-pull config :) if you dont put any hdd or ssd between motherboard and front of the case you will have about 9 inches of free space :)
Date published: 2014-02-06
Rated 5 out of 5 by from Very nice case Compact in terms of height and depth, great build quality. Only compromise is that you need a mini itx mainboard. Takes a full size atx psu and graphics card and optical drive. Internal drive options are good with 3 shared points that can take either ssd or 3.5"drive (one shared with optical that can take two ssd or one 3.5") and two dedicated ssd points (one under optical bay and one in place of side fan).
Date published: 2014-01-16
Rated 4 out of 5 by from It's a box... ..into which I assembled a computer. It does exactly what it says on the... er... box!
Date published: 2014-01-13
Rated 5 out of 5 by from What a brilliant Case Design I needed a flexible design of ITX case that would allow me to use a Fullsize PSU, Watercooling for the CPU, Fullsize Optical Drive and three 2.5inch format Drives and SSD Devices. This case did it all and still allowed me to keep all the cabling tidy to ensure good airflow. It really does do what it says on the box
Date published: 2013-12-23
Rated 5 out of 5 by from Small cube but big enough for full size components The new Elite 130 looks great in the pics and sounds perfect in all the reviews It's a well thought out design and a very adapatble case with great looks - apart from the PSU at the back - and very well finished inside and out I removed the side fan and fitted the SSD on the side plate and a 3.5" HD in the top bay and another on the base floor - lots of other options are availible A great case and a lot of fun to build into a small home or office PC or anything a mini ITX board will allow I would suggest a modular PSU and I looped and tucked the cable runs down the side rails and sucked the air up off the MB and out the back with the PSU
Date published: 2013-11-18
  • y_2018, m_2, d_23, h_20
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.7
  • cp_1, bvpage1
  • co_hasreviews, tv_1, tr_7
  • loc_en_GB, sid_53496, prod, sort_[SortEntry(order=FEATURED, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_scan
Questions & Answers

can i

can i put my msi H61m-p31/w8 mobo and gtx 780 in this as im aiming for a steam like machine
Asked by: superman
NO. That motherboard is "Micro ATX" size and so too large.
Answered by: Dalbriksson
Date published: 2016-05-28

Whats the Max Size for the PSU??

Or any suggestions for PSU fully modular.
Asked by: Boon2k
Hello, This supports standard length ATX PSU's. Regards,
Answered by: LizN
Date published: 2017-02-18

Will this case fit a standard Intel Heatsink?

From an i5 6500
Asked by: DanL94
Hello This should be fine to work, the stock coolers are roughly 50mm in height whereas this case supports upto 65mm. Regards,
Answered by: LizN
Date published: 2016-11-09
  • y_2018, m_2, d_23, h_20CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.7
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_3
  • loc_en_GB, sid_53496, prod, sort_[SortEntry(order=LOCALE, direction=DESCENDING), SortEntry(order=FEATURED, direction=DESCENDING), SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_scan
Cooler Master Elite 130 Mini ITX Case
Cooler Master Elite 130 Mini ITX Case