Alesis Strike Amp 8 MK2 Electronic Drum Amplifier
Alesis - Strike Amp 8 MK2, 2000-Watt Electronic Drum Amplifier with Bluetooth
Email me when the availability or price changes
Finance this product
- From £10.80 / month (APR 0%) for 24 months
- Spend over £390.00 and Buy Now, Pay Later or spread the cost of your finance over 24-48 months with a 10% deposit.
2000-Watt Electronic Drum Amplifier with Bluetooth
Alesis - Strike Amp 8 MK2
Powerful Partner for Electronic DrumsThe Alesis Strike Amp 8 MK2 is a high-performance bi-amped speaker specially designed for Electronic Drums. It outputs a massive 2000 watts, so you have enough headroom for almost any performance or rehearsal. The heavy duty 8” woofer and 1” high-frequency compression driver are tuned for a flat response across the spectrum to deliver the most accurate and authentic representation of acoustic and electronic drum sounds from your instrument. Strike Amp 8 MK2’s performance is exceptional, with a max 129dB SPL and a 52-20kHz frequency range; wide enough to deliver the full thump of your kick drum, right up to the crystal-clear snap of your snare and hi-hats.
Strike Amp 8 MK2 features two combo XLR + 1/4" combo inputs for connecting your electronic drum kit and/or a multipad instrument, each with their own independent volume controls. You can also wirelessly connect a mobile device to the Strike Amp 8 MK2 via Bluetooth, so you can stream music wirelessly while rehearsing or during set breaks. There is also an XLR output for chaining more than one speaker together or sending the signal from your Strike Amp out to a front of house mix.
At a glance
• Powerful, Professional Sound
• Precision-Tuned for Electronic Drums
• Bluetooth® Enabled
• All the Connectivity You Need
• Quickly Adapts to Venues and Rooms
• Lightweight, Flexible and Sturdy
Adapts to Any Stage or Room
be heardStages and rehearsal rooms can easily become dense and muddy sounding as lower frequencies from different instruments battle each other; Strike Amp 8 MK2 has a HPF EQ switch to quickly pull troublesome frequencies out and make sure your tone sits perfect in the mix.
Unwanted electrical noise can also be a common problem; Strike Amp 8 MK2’s ground lift switch can eliminate hums and buzzes resulting from ground loops.
Road-Ready Lightweight Design
ultra-convenientStrike Amp 8 MK2 is rugged yet lightweight and easy to transport (at 21 lbs / 9.53 kg) making load-ins at the gig or rehearsal space easier than ever.
While you can use Strike Amp 8 MK2 in its intended wedge position, its versatile design means that it can also be used in an upright or pole-mounted position, making it easier to direct your sound wherever you need it, which is especially helpful at outdoor gigs or other places where PA backline is limited.
The Tech Spec
| Features | Specification | Output Power | 2000 W |
|---|---|
| Drivers | Low-Frequency: 8.0” (203 mm) driver, 2.0” (50 mm) high-temperature voice coil. High-Frequency: 1.0” (25 mm) exit ceramic driver with 1.4” (35 mm) coil. |
| Crossover Frequency | 2 kHz |
| Maximum SPL | 130 dB (peak) dB-SPL @ 1 m |
| Frequency Response | 62 Hz – 20 kHz (+/-3 dB) |
| Frequency Range | 52 Hz – 20 kHz (-10 dB) |
| Horn Coverage | 90° horizontal x 60° vertical (nominal) |
| Connectors | (2) XLR+1/4” (6.35 mm) TRS combo inputs (Balanced) (1) XLR output (Link) (1) IEC power cable input |
| Input Impedance | Line: 10 KΩ balanced, 20 KΩ unbalanced |
| Gain/Volume Control Range | -∞ to 0 dB, +4 dBu nominal, +10 dBu for max output |
| HPF Switch | 100 Hz |
| Bluetooth | Version: 5.0 Profile: A2DP, AVRCP Codec: SBC Range: up to 100 feet (30.5m) |
| Power | Connection: IEC Input Voltage: 100-120V, 50/60 Hz; 220-240V, 50/60 Hz Consumption: 1100W Fuse: T15AL AC250V; 220-240V T6.3AL AC250V |
| Protection | Electronic clip, thermal, and transducer overdrive protection |
| Mounting/Installation | Standard 36 mm pole socket |
| Operating Temperature | 14°F to 113°F / -10°C to 45°C |
| Dimensions (W x D x H) | 10.1” x 9.6” x 17.2” 256 mm x 245 mm x 436 mm |
| Weight | 21.05 lbs 9.5 kg |
PayPal Credit
| Monthly Payment: | £21.59 |
| Instalment Rate: | 0% p.a. (fixed) |
| Cost of purchase: | £259.00 |
| Total inc. interest: | £259.00 |
| Monthly Payment: | £10.80 |
| Instalment Rate: | 0% p.a. (fixed) |
| Cost of purchase: | £259.00 |
| Total inc. interest: | £259.00 |
| Example | |
| Minimum Spend: | £99 |
| Instalment Rate: | N/A |
| Cost of purchase: | £99 |
| Total inc. interest: | £99 |
Representative Example:
Purchase Rate: 23.9% p.a. (variable)
Representative: 23.9% APR (variable)
Assumed Credit Limit: £1,200
Subject to status. Terms and Conditions apply.