Convert Any IDE Device to SATA - Mini Converter Internal with power cable
Scan code: LN24964
Manufacturer code: ST-101L
End Of Life
Convert Any IDE Device to SATA - Mini Converter Internal with power cable
Lycom ST-101L Mini Vertical Converter Board - IDE Device to SATA ALL IDE Types Inc HDD/DVD-ROM
Scan code:
LN24964
Manufacturer code:
ST-101L
This product is no longer available to purchase.
Email me when the availability or price changes
- SCANPROTECT Protect against installation damage for 28 days.
Product Overview
Mini Vertical Converter Board for IDE Device to SATA MotherBoard
IDE Device --- > Serial ATA Device !
ALL EIDE Type DVD / DVD-RAM / CD-ROM / CD-RW / HDD Become New Serial ATA Devices!
Attaches this Mini Dangle board to the back of all types of ATAPI, ATA/133, ATA/100, ATA/66, ATA/33, EIDE and IDE storage devices (such as Hard Disk, DVD, DVD-RAM, CD-ROM, CD-RW, MO, ….) and make them become new Serial ATA Devices and meet SATA standard.
This Bridge board can support HDD larger than 137GB.
Installation
Step 0. Make SURE your Computer is in a Power OFF State - Do NOT plug in this device if your system is powered up.
Step 1. Set the jumper of IDE device to MASTER MODE
Step 2. attach the Lycom ST-101L to the back of the IDE Device
Step 3. Connect Y-Type Power Cable to Lycom ST-101 J1 Pin and a Molex Power Connector from the PSU
Step 4. Connect SATA Cable to Lycom ST-101 SATA Port and Avilable SATA port on your SATA Controller Card/Motherboard
Step 5. If available Connect the 2 pin L.E.D indicator Cable from your CASE to the 2 Pin LED Header on the Lycom ST-101L
Step 6. Once ALL cables are plugged in then Power up your machine and enjoy your IDE device running on your SATA port
This device must not be attached to a IDE device that is allready powered on
Note recommend for IDE racks as this device is not hotswap compatable
If your DVD Drive is not working please Remove Jumper from pins J2 on the Lycom ST-101 Features * Can Attaches to any type of ATAPI, ATA/133, ATA/100, ATA/66, ATA/33, EIDE and IDE storage devices (DVD, DVD-RAM, MO, CD-ROM, CD-RW, Hard Disk, ….)
* 48 bits LBA can Break Capacity-Limit to Support HDD larger than 137GB
* Mini Board size (59mm x 25mm), No space wasted
* Compliant with Serial ATA 1.0a specifications and High transfer rate of 1.5Gbps
* Supports Spread Spectrum in receiver
* Compliant with ATA specifications
* Compatible with Ultra ATA 133
* Automatically decode the ATAPI command to know the UDMA direction
* 100% hardware bridge converter board to support PC, MAC and Linux environment
* Fully RoHS Compliant
IDE Device --- > Serial ATA Device !
ALL EIDE Type DVD / DVD-RAM / CD-ROM / CD-RW / HDD Become New Serial ATA Devices!
Attaches this Mini Dangle board to the back of all types of ATAPI, ATA/133, ATA/100, ATA/66, ATA/33, EIDE and IDE storage devices (such as Hard Disk, DVD, DVD-RAM, CD-ROM, CD-RW, MO, ….) and make them become new Serial ATA Devices and meet SATA standard.
This Bridge board can support HDD larger than 137GB.
Installation
Step 0. Make SURE your Computer is in a Power OFF State - Do NOT plug in this device if your system is powered up.
Step 1. Set the jumper of IDE device to MASTER MODE
Step 2. attach the Lycom ST-101L to the back of the IDE Device
Step 3. Connect Y-Type Power Cable to Lycom ST-101 J1 Pin and a Molex Power Connector from the PSU
Step 4. Connect SATA Cable to Lycom ST-101 SATA Port and Avilable SATA port on your SATA Controller Card/Motherboard
Step 5. If available Connect the 2 pin L.E.D indicator Cable from your CASE to the 2 Pin LED Header on the Lycom ST-101L
Step 6. Once ALL cables are plugged in then Power up your machine and enjoy your IDE device running on your SATA port
This device must not be attached to a IDE device that is allready powered on
Note recommend for IDE racks as this device is not hotswap compatable
If your DVD Drive is not working please Remove Jumper from pins J2 on the Lycom ST-101 Features * Can Attaches to any type of ATAPI, ATA/133, ATA/100, ATA/66, ATA/33, EIDE and IDE storage devices (DVD, DVD-RAM, MO, CD-ROM, CD-RW, Hard Disk, ….)
* 48 bits LBA can Break Capacity-Limit to Support HDD larger than 137GB
* Mini Board size (59mm x 25mm), No space wasted
* Compliant with Serial ATA 1.0a specifications and High transfer rate of 1.5Gbps
* Supports Spread Spectrum in receiver
* Compliant with ATA specifications
* Compatible with Ultra ATA 133
* Automatically decode the ATAPI command to know the UDMA direction
* 100% hardware bridge converter board to support PC, MAC and Linux environment
* Fully RoHS Compliant
Convert Any IDE Device to SATA - Mini Converter Internal with power cable
![Convert Any IDE Device to SATA - Mini Converter Internal with power cable]()