Universal Audio 710 Twin-Finity

Universal Audio 710 Twin-Finity Tone-Blending Mic Pre/DI Box, Dual Path Class-A Tube and Transimpedance Solid State Amp

Universal Audio
Scan code: LN71761 Manufacturer code: 710 Twin-Finity Request call
£715.00Item currently awaiting an ETA
Pre order
Buy Now, Pay Later with a 10% deposit. Or spread the cost of your finance over 24-48 months.
High End
Free Delivery Delivery options Free By DPD DPD Delivered to your specified address. Receive SMS with one-hour delivery window. Free Collect Instore Q-Collect Place your order online and collect from our Bolton store with Q-Collect. Weekend, timed and European delivery options are available at checkout
Product Overview The award-winning 710 Twin-Finity™ is a radically new UA mic preamp design that combines both the classic retro warmth of tubes with the transient bite of solid-state, all in a 2U, half-rack unit. The 710 was created specifically to add the tonal versatility and sonic inspiration missing from generic audio interface preamps. Tone blending is continually variable between 100% tube and 100% solid-state, offering a practically infinite range of unique preamp tones, plus the ability to easily dial-in your own signature sound. There are lots of sensibly priced solid-state and tube preamplifiers out there, but the 710 is the only one that offers the best of both worlds — as well as everything in-between — all in one box, and within reach of any serious project studio’s budget.

The key to its sonic flexibility lies in its innovative circuit design, featuring a solid-state transimpedance input amp simultaneously driving separate, phase-aligned tube and solid-state gain stages, which are then summed to a single output.. The mix between the 310 volt single-ended class-A triode tube stage and solid-state transimpedance stage is controlled via the "Blend Knob" labeled "8". Blending is continually variable between 100% tube and 100% solid-state offering a practically infinite range of unique pre-amp tones and the ability to easily dial-in your own signature sound.

Like all our other preamp designs, the 710 features dual gain-stage controls (Gain/Level) which can radically vary the amount of coloration and distortion by allowing you to crank up the input gain like a guitar amp. The VU meter features a unique "Drive" mode allowing you to see how hard you are driving the input stage.

Versatility makes the 710 the perfect preamp partner for any mic collection. Plus, the discrete JFET DI input circuit can also easily handle any electric instrument. Guitar and bass players will especially appreciate the 710s ability to bring out the best of both active and passive pickups. The 710 Twin-Finity includes a 19" rack-kit for mounting one or two units. Features • Twin-Finity™ Tone-Blending Mic/Line Preamp & Hi-Z Instrument DI
• Dual-Path 310 volt Class-A Tube and Transimpedance Solid State Preamp
• Phase-Aligned "Tone-Blending" of Tube and Solid State
• Dual Gain Stages: Wire with Gain to Creamy to Crunchy
• Discrete JFET DI with 2.2M ohm Ultra Hi-Z impedance
• Monolithic Balanced Output Stage
• 70dB+ of gain, +48V Phantom, Pad(-15dB), Phase Invert, and Low Cut Filter(75Hz)
• Output and "Drive" backlit VU metering
• Portable, Rack-Mountable design for Studio, Desktop or Stage
• 19” Rack Kit Included
• Front Panel Hi-Z Input (switched from Mic/Line automatically via Jack Detect)
• Rear Panel XLR Mic Input, XLR Line Input and XLR Line Output
• Universal Internal Power Supply
• Heavy-Duty Metal Construction

Technical Specifications:

Inputs
• Microphone (Female XLR)
• Balanced Line (Female XLR)
• Unbalanced Instrument (1/4" jack) (D.I.)

Outputs
• Balanced Line (Male XLR)

Type
• Tube & Solid-State Phase-Aligned Tone-Blending Mic Pre & DI

Tube Complement
• 12ax7

Pad
• -15dB

High Pass Filter
• 75Hz

Maximum Power Consumption
• 160mA @120VAC
• 20W

Power Requirements
• 100-240VAC

Dimensions
• 8.45W x 3.5H x 10.25D

Weight
• 5.25 lb

Impedance:

Mic Input Impedance
• 2K ohms

Line Input Impedance
• 10K ohms

Hi-Z Input Impedance
• 2.2M ohms

Internal Output Impedance
• 600 ohms

Gain/Levels:

Gain Range for Unit
• -Infinity to 70dBu

Mic Range Gain Pot
• 10 ~ 60 dBu

Line Range Gain Pot
• -10 ~ 40 dBu

Hi-Z Range Gain Pot
• -10 ~ 40 dBu

Maximum Mic Input Level Gain @min SS
• +18 dBu

Maximum Mic Input Level Gain @min Tube 1% THD
• -7 dBu dBu +8 dBu w/pad

Maximum Line Input Level Gain @ Min SS
• +30

Maximum Line Input Level Gain @ Min Tube 1% THD
• +8 dBu

Maximum Hi-Z Input Level Gain Min SS
• +18

Maximum Hi-Z Input Level Gain Min Tube 1% THD
• +8 dBu

Maximum Output Level into 600 ohms
• +18 dBu

Maximum Output Level into 100k ohms
• +28 dBu

Tube Clipping Level
• Same as Max In

Solid-State Clipping Level
• Same as Max In

Frequency Response:

Mic Frequency Response
• 20Hz to 100kHz +/- 0.2 dBu

Line Frequency Response
• 20Hz to 100kHz +/- 0.2 dBu

Hi-Z Frequency Response
• 20Hz to 100kHz +/- 0.2 dBu

Distortion
• Min THD+Noise @ +4dBU
• 0.1% tube 0.005% solid-state
Specifications
Specifications
Product Type  
PC Interface N/A
Assignable Faders  
Assignable Knobs  
Assignable Pads  
Keys  
Wheels  
Connectivity (Input)
  • 1 x 1/4" Mic/line
  • 1 x MIC (XLR)
  • 1 x XLR
Connectivity (Output) 1 x XLR
Sample Rate  
Bit Rate N/A
Frequency Response (Input) 20Hz - 100kHz
Frequency Response (Output) N/A
Maximum Input Level N/A
Maximum Output Level  
Dynamic Range  
Dimensions (mm)  
Misc. Notes  
Package Type Retail
Warranty

Please note your statutory rights are not affected.

For further information regarding Scan's warranty procedure please see our terms and conditions

Details
Duration:
12 months
Type:
Return to base
DOA Period:
28 days
RTB Period:
1 months
Manufacturer Contact Details
Manufacturer:
SCAN
Reviews
Questions & Answers
Universal Audio 710 Twin-Finity
Universal Audio 710 Twin-Finity