The patent pending H140-X CPU liquid cooling system is the scaled down version of the award winning H220-X and H240-X cooling kits, formatted to fit space constrained systems. The radiator has been designed to exactly fit the width of a 140 mm fan, so that the product can be installed at the back of cases using a 140 mm exhaust fans without interference. The H140-X can also be installed at the top of the case, and there is sufficient tubing length to install it in this configuration.
The H140-X includes the same enthusiast grade components as the H220/H240-X kits, such as the built-in MCP30 pump, and the Apogee® XL waterblock. This product remains entirely focused on low to inaudible operating noise with extreme thermal performance, and it is engineered to appeal to the broadest possible spectrum of performance oriented users:
The H140-X leverages Swiftech's patent pending technology initially developed with the MCR-X20 Drive series of radiators; in this technology, the pump is fully integrated into the radiator instead of being built into the waterblock. Two major improvements were implemented compared to the original MCR-X20 series of radiators:
thanks to a revised placement of the pump and reservoir, the H140-X radiator is now the most compact 140mm heat exchanger on the market, thus facilitating installation of the unit in almost any case having space for a 140mm fan.
the reservoir is now transparent and LED backlit, allowing users to inspect the coolant level while enjoying the inner workings of the pump as can be seen below in a customized system featuring the smaller H220-X that we presented for CES 2014.
Finally, as an immediate benefit of this configuration we were able to use our new extreme performance flagship waterblock the Apogee™ XL which resulted in enhanced thermal performance and flow rate, not to mention superb cosmetic appeal thanks to the XL's multi-color back-lighting capabilities. While only recently released, the Apogee XL has already received two Gold Awards.
From virtually silent to comfortable audible noise levels
Our design objective for all Swiftech products is always to minimize the operating noise while preserving high thermal performance characteristics. At its lowest speed settings, the H140-X system is virtually inaudible. At its maximum speed, it remains within comfortable audible noise levels.
The H140-X is probably the easiest AIO liquid cooling kit to install bar none, and is even easier to setup than many high-end air coolers.
Superior Thermal Performance
Thanks to its copper & brass 140mm radiator, high static pressure Helix 140mm pwm fan, more powerful DC pump than any other AIO on the market, and because it uses the Award winning Apogee™ XL waterblock, the H140-X kit delivers superior thermal performance to any comparably sized system on the market.
The H140-X differentiates itself from other AIO's by its ability to be fully customized, and to support additional liquid cooled components such as graphics cards, chipset, and/or additional radiator(s).
• From a practical standpoint, this is possible thanks to:
- The presence of a reservoir including a fill-port built into the radiator so that the system can be easily emptied or refilled by the user at will,
- Enthusiast grade 5/8" OD (3/8" ID) black EPDM tubing fastened to swivel fittings with an elegant clamping system that users can easily remove and safely re-install.
- The factory tubing and fittings can be replaced by aftermarket G1/4 compatible offerings of your choice (an optional G1/4 adapter is needed for the pump outlet, and is available in the accessories section).
• From a thermal performance standpoint, this is made possible by:
- The high thermal capacity of the 140mm copper and brass radiator
- The powerful high-pressure pump capable of driving sufficient flow to cool multiple devices in the loop.
- The award winning flagship Apogee XL waterblock
Automatic speed control or fine-tuning right out of the box
Both the pump and the fan are PWM compliant devices, allowing the H140-X to be recognized and speed-controlled by the motherboard depending on CPU temperature just like any standard CPU cooler. As a bonus, the system includes a PWM splitter allowing connection of up to 8 PWM devices which can then be controlled as one by the motherboard.
As shipped from our factory and installed as directed (*), the H140-X CPU cooler requires no maintenance during its 3 year warranty period; a system refill is recommend at the end of 3 years. Under extreme ambient conditions, the system may need more frequent refills. If upgraded by the user, the interval of time between refills will depend on how users implement their customized loop.
Find Similar Products
Find similar products with the same specifications as Swiftech H140-X CPU Hydro Cooler Kit for Intel & AMD CPU's, 140mm PWM Fan, G1/4 Thread . Please choose from the list below.