Silverstone Sugo Mini ITX Case

Silverstone Sugo SST-SG13B Black SFF Mini ITX Case

Silverstone
Scan code: LN62744 Manufacturer code: SST-SG13B Request call
£39.98
In stock
Spend over £225 and Buy Now, Pay Later or spread the cost of your finance over 24-48 months with a 10% deposit.
High End
Delivery options £5.48 By DPD On 27th Mar 2017 DPD Delivered to your specified address. Receive SMS with one-hour delivery window. £4.79 Collect from local shops UPS and DPD Pickup Collect your parcel from your newsagents, petrol stations and convenience stores. Free Collect Instore Q-Collect Place your order online and collect from our Bolton store with Q-Collect. Weekend, timed and European delivery options are available at checkout ScanProtect protection ScanProtect Protect against installation damage for 28 days.More
Frequently Bought Together
Product Overview After bringing Mini-ITX into mainstream DIY (do it yourself) market in 2009 with the Sugo SG05, SilverStone is looking to define the category again with SG13, a newly evolved design that aims to satisfy every type of computer users. At only 11.5 liters in size, it has suitably small statue for easily integrating into numerous computing environments and will comfortably fit many standard components for general purpose or office builds. For enthusiasts and in keeping with Sugo series’ famed tradition, the SG13’s ability to fit 10.5” long expansion card, standard ATX power supply, and all-in-one liquid cooler in 120mm or 140mm size will help produce amazingly small and powerful systems. Features • Support standard-length expansion cards (10.5 inches)
• Mini-DTX / Mini-ITX motherboard & ATX PSU compatible
• Support 120mm or 140mm single fan All-in-One Liquid Cooler
• Support 2.5” and 3.5” hard drives
• Elevated standoff for motherboard back side components
Specifications
Specifications
Case Edition SG13
Case Form Factor Mini-ITX
Motherboard Form Factor
  • Mini-DTX
  • Mini-ITX
Material Steel
Front/ Side/ Top Panel
  • 1 x Headphone
  • 1 x Mic In
  • 2 x USB 3.0
Drive Bays
  • 1 x 2.5" Internal
  • 2 x 2.5"/ 3.5" Internal
Expansion Slots 2
Fan Bays 1 x 120/140mm
Fans Included None
Front Radiator Compatibility  
Top Radiator Compatibility  
Bottom Radiator Compatibility  
Rear Radiator Compatibility  
Side Radiator Compatibility  
Window No
Power Supply Form Factor ATX
Max PSU Length  
Max CPU Cooler Height 61 mm
Max VGA Card Length mm
Colour  
Dimensions  
Weight  
Warranty

Please note your statutory rights are not affected.

For further information regarding Scan's warranty procedure please see our terms and conditions

Warranty information has not yet been updated for this product. For further information please call 0871 472 4747 or 01204 474747.

Customers also bought
TekSpek Guides
Computer Cases
Computer Cases
Date Issued: 6th Jul 2011

There's more choice than ever before, but which computer case is right for you and which features should you look out for?

Read More

Chassis Airflow
Chassis Airflow
Date Issued: 20th Oct 2008

The modern PC is potentially a mass of heat output and heat production hot spots. With CPUs rated at more than 100W of heat output, single graphics boards carrying similar ratings (and people want to run two!), multiple hard drives the norm, lots of memory and mainboards covered in heatpipes to combat toasty core logic and PWM circuits, a PC appreciably warming up a room when it’s working hard is no joke.

Read More

Reviews
Silverstone Sugo SST-SG13B Black SFF Mini ITX Case is rated 4.7 out of 5 by 3.
Rated 5 out of 5 by from Brilliant case for a tiny ITX build I bought this case after a lot of research on mITX cases. Many of them seemed rather large and defeated the point of a tiny but powerful PC. The Sugo provided exactly what I was after. The case itself is pretty attractive in metal and black plastic, with a mesh panel on the front. There is a lot of space inside and you can remove the various parts including the mounts for HDDs/SSDs and the PSU bracket. It will possibly fit a full size ATX PSU but this may also foul on any CPU cooler. I had gone for a Corsair H80i and the pipes on this were pushing too much against my PSU so I added an SFX one instead. There is room for a large GPU but be sure to check sizes. The outer shell has been very cleverly designed with a large grill that should line up with the fans on most GPUs, allowing it to pull in air from outside. Of course this means no dust filtration. I was able to fit the aforementioned cooler into the front of the case, it will also fit a 140mm fan there but this will take away room for the GPU. I did use an m.2 drive for my build which greatly reduced cables needed, so I can't comment on the ease of fitting in 2.5" or 3.5" drives. All in all, a very nice and very well priced case for a tiny build. Quality is high for what you are paying, and it wasn't difficult to work with. I would always suggest a modular PSU and be careful with any all in one coolers as the pipes do need to have some space when you bend them round.
Date published: 2016-12-22
Rated 5 out of 5 by from A great replacement/substitute for my old case! I bought this case as I was getting a few heat issues in my Lian Li TU100. The problem with the Lian Li, is that there is little space for the graphics card to vent, and I haven't found a blower-style mini-itx card that could have solved the problem. So I decided that I would get a new case either as a replacement, or as somewhere to house my system while I mod the Lian Li. Well, I have to say that it might take me a while to make the effort with the TU100, because this case is fantastic! My GPU is running under 30 degrees idle, and barely hits 75 under load! This case is easy to install in, and even has room for all-in-one liquid solutions. For around £35, this case is brilliant for a small-size high power system. Buy it!
Date published: 2016-01-13
Rated 4 out of 5 by from Great Case for price but not perfect It allows for a lot of potential and can fit most hardware inside at an itx form factor. A liquid cooler fits perfectly. The only bad points are the case, i think dust filters should be on all vents as there is a lot of open vents and with such a small space and being annoying to clean, it would help greatly. The only other bad thing is that its not the best one on the market, there are some others with similar cooling, filter and hardware capability and options but have extra features and slightly better placement of things inside. However i do not think this is bad, for the price, its good.
Date published: 2015-06-19
  • y_2017, m_3, d_23, h_17
  • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_3
  • loc_en_GB, sid_62744, prod, sort_[SortEntry(order=FEATURED, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_scan
Questions & Answers

Will there be enough clearance for a h90 and SSD

I will be mounting my SSD onto the floor of the case so I am unsure whether my MSI gtx 770 and SSD will interfere with the radiator.
Asked by: BinaryJava
I've not seen someone use the bottom SSD mount AND an AIO liquid cooler before, but I would suggest that you consider bodging it a bit. As SSDs have no moving components, you don't have to worry about shock damage. So get yourself some stick on Velcro and pop the SSD wherever you can find space! There will be a way.
Answered by: Ben1092
Date published: 2016-03-19
  • y_2017, m_3, d_23, h_12CST
  • bvseo_bulk, prod_bvqa, vn_bulk_1.0.0
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_1
  • loc_en_GB, sid_62744, prod, sort_[SortEntry(order=LOCALE, direction=DESCENDING), SortEntry(order=FEATURED, direction=DESCENDING), SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_scan
Silverstone Sugo Mini ITX Case
Silverstone Sugo Mini ITX Case