Rated 5 out of 5 by 2
Rated 5 out of 5 by Yura What a case...
This is my second Silverstone case, first being a little smaller (Silverstone SUGO SG8), but this size is perfect and the layout of the HDD, power supply and a lots of fans (with room for a huge air cooler and a place to attach a dual water cooler radiator) makes this a really awesome case!
14 January 2014
Rated 5 out of 5 by harryglan Looks great and runs cool when built
Ignore the installation manual supplied with this case beyond page 6. You need to remove the outer casing, all the fans and power supply housing to make it easy to install your motherboard -this isn't a major chore as the build quality and access are excellent. Watch out for the brass stand-off needed for the front left hand corner of a m-ATX motherboard or you will bend the board down when fitting it - nasty!. I fitted a large Thermalright HR-02 Macho cooler with no problems. The rig is now idling at 30 degrees C and is absolutely silent. I haven't connected any internal case fans as I'm not overclocking it yet. The only issue is the internal mains power cable that carries the mains input from the back of the case to my 170mm long PSU, the right-angled cable connector into the PSU fouls the case side-cover. I think I can shave the connector down a bit without compromising the insulation. Longer PSUs will be a problem,. Anyway, a terrific case if you take your time with the build and get it right.
04 October 2013