Probably the First Triple Monitor Stand available that can take from 24" to 30" Monitors. with VESA 200x100 - 100x100 & 75x75 mm Features
• Arm Angle Adjust • Height Adjust • 360 degrees rotation • Cable Management • Smart Torque Adjust • Aluminium Alloy structure • Easy Installation
Please note your statutory rights are not affected.
ScanFX TS633E Ultra Slim Triple Monitor Stand for 24"-30" Monitors with Height/Tilt/Swivel/Rotate VESA 200mm,100mm,75mm is rated
4.4 out of
Rated 4 out of
Good product - but has some flawsThis is a good product. You will not find a stand that can take upto 3 x 30inch monitors for anywhere near this price. It is constructed well, but the sheer physics of having weight on the end of a metal bar, and also the construction, mean that it is difficult to get all 3 monitors, especially if they are heavy 27/30 inch monitors aligned perfectly.After much messing around, I am nearly there. I think that this in part is also to do with the fact that the feet have no alignment adjustment etc. Good product overall, but if you are an absolute perfectionist, you will have to play with it a lot to get it spot on. I am sure that it is possible to get it spot on-maybe I didnt have enough patience.
Date published: 2018-01-12
Rated 4 out of
32inch modsHi, I've had to modify the stand for use with 32inch monitors.
Using wall mounts (cheap £6 ones) I managed to get a decent angle for surround gaming.
Without the wall mounts, this stand only works for 30inch and below.
(32 inch monitors will be in a straight line).
Date published: 2016-12-07
Rated 5 out of
Great setup for my six monitors.Bought this to free up space on my desk for my six monitors, 3 x 27" plus 3 x 24".
Strong and well built with a great stance and no flexibility under weight.
Date published: 2016-08-15
Rated 3 out of
A budget option to the 3 monitor issueOkay, let's start off with some hard truths. Yes, you get what you pay for, no it's not a 500ukp super duper whiz bang stand with hydraulic this and sprung that. It is a basic metal framework that will hold your monitors in that one position you need it 99% of the time and that's exactly why you should buy it if you are looking for a 3 monitor stand.
The finish if okay. Mine was missing a tiny non essential grub screw and the legs on one side don't stay flat on the desk but it is not enough to make me want to return it.
I have it set up with three 27" acre monitors and they are both aligned and straight, but they are reasonably light for 27" monitors.
So, overall, good enough I would say. Not going to light any fires but unlikely to let you down.
Date published: 2016-02-24
Rated 5 out of
Great 3 monitor standHaving looked for a 3 monitor 27" stand which looked like it would cope I settled for this one and its very good, its the only one I found that have the brackets between the monitors, much more sensible. It also has the ability to mount another one on top so have 6 at once, not the cheapest on the market but well worth the money.
Date published: 2016-02-05
Rated 4 out of
Almost perfect monitor standThis is a really nicely built monitor stand that only suffers from a few small problems (hence why I haven't given it 5 stars)
Well made/solid construction
No rough edges
Ability to tighten thus needing more force to move screens
Rubber pads on bases, stops the stand sliding and damaging desk
good clean looks
as good at stands 3x it's price
Unless rear screws on the cross bar are very tight side monitors can droop (worried about stripping the thread)
Too little angle towards the user on the side screens
Very basic cable management
Difficult to adjust perfectly square
When everything was tightened without fiddly adjustment one part of the base would lift from the desk
Date published: 2015-05-27
Rated 5 out of
Great Monitor StandI just purchased one of these to go along with the 3 23.8" Dell U2414H IPS LED Monitor Ultra Thin 6.05mm Bezel 2xHDMI/2xDP 1920x1080 250cd/m2 2M:1 8ms VESA USB 3.0 for use with Flight Simulators and Racing games. Very nice stand allowing for multiple size monitors/vesa mountings and very configurable. Recommended 2 people for the setup.
Date published: 2015-03-31
Rated 4 out of
Best quality and value stand found after years of searching - but it's all in the detailI'm lucky enough to own three Dell 30" Monitors. In my experience with these monitors, either the stands over promise, lack flexibility or want £400-500 for something which doesn't look overly convincing.
This stand has delivered and for a great price. It is also very solid and well built. Easy to put together and position, adjusting the different heights, pivot through 360 degrees and swivel.
There is however a BUT. With three 30" monitors all in landscape mode the combined weight is too much and the whole solution becomes very unstable. The stand requires rear stabilization in that configuration. In the documentation that comes with the stand it does show that a six monitor configuration is possible using another of these stands inverted with collars joining the two. The thought of six monitors with this is scary.
However, I currently have the three monitors fixed into the stand with central landscape monitor and the two outer monitors in portrait mode. This works and is a little more stable, moving the centre of gravity a little, however it is still a little tippy.
The maximum size I would rate this stand for in everyday use would be thin bezel 27" (the Dells have 2/3" bezel). Above this size, the arms cannot be angled and they must be flat which restricts the ability to see the depth of field from end to end. If you want a wraparound effect, in landscape mode, the maximum screen width is more like 24".
If you want to create a six screen wall of beauty which only gets viewed from afar, this stand would be perfect as the arms don't need to be angled (and if you can get the collars, or use another method to join two of these stands together) but be prepared to have to stabilize and fix it to something.
For those with monitors above 27", a monitor 2 x landscape configuration works really, really well and is really flexible. Combine it with another inverted stand and a 2 x 2 configuration is a real possibility for a great price.
Will this fit 3 x 28" Hanns-G HZ281 monitors?
They are big, nearly an inch of bezel. It says big enough for three 32" monitors, but I want to make sure before I purchase it and end up having to send it back if it doesn't fit.
Height 523.2 mm
Width 652.8 mm
Depth 254 mm
Asked by: Nero
I reckon it will - but google the code and you will find the manufacturers website, and there are PDF's with exact measurements and you can then decide.
Answered by: MehulL
Date published: 2018-03-17
can the mounts be different heights?
Asked by: thestalosj
Yes, the three monitors can be at different heights.
Answered by: turbine2
Date published: 2016-11-21
Whats the measurements at the base? Will this fit on a 120cm/12,000mm desk?
Whats the measurements at the base? Looking at the measurements in third image it looks like there is a decimal place missing. So I think its 103.9 cm is this right?
Asked by: ToxicTigger
The measurements in the image are in mm, so the base is ~103.9cm wide.
Answered by: JackB
Date published: 2017-09-05
Asus VC239H Compatible?
Would this mount be compatible with 3 Asus VC239H monitors as they are only 23" rather than the stated minimum size of 24". Thanks
Asked by: JamieM
This this would be fine but there may be a gap in between the monitors.
Answered by: LizN
Date published: 2016-07-09
What is the overall depth from the vesa mount to the back of the stand ?