Rode NT1 KIT, Condenser Microphone,

Rode NT1 KIT, Condenser Microphone, Cardioid Pattern, Wired, 3 Pin XLR, inc Shock Mount + Pop Shield

Rode
Scan code: LN56586 Manufacturer code: NT1KIT Request call
£259.00
In stock
Pay on Scan Finance with a 10% deposit from just £6.47 / month (APR 15.9%)
High End
Free Delivery Delivery options Free By DPD On 12th Dec 2016 DPD Delivered to your specified address. Receive SMS with one-hour delivery window. £4.79 Collect from local shops UPS and DPD Pickup Collect your parcel from your newsagents, petrol stations and convenience stores. Free Collect Instore Q-Collect Place your order online and collect from our Bolton store with Q-Collect. Weekend, timed and European delivery options are available at checkout Scansure protection Scansure Protect against installation damage for 28 days.More

RØDE NT1 Microphone

Cardioid Condenser Microphone

Machined from 6061 Aluminium and then covered in Nickel plating to stop corrosion, it is then coated in a hard wearing Military Grade ceramic layer using advanced electrostatic application techniques to guarantee a hard wearing finish that is resistant to scratches and marks.

This then is the outside of the NT1. A mic designed from the ground up to be a marriage of innovation and traditional ways, starting off with the capsule , which is a brand new design, featuring a sound that reminds you of old style famous Mics but with an extremely low noise floor.

It has a very detailed Mid-range response, with smooth high frequencies and warm bottom end. The transducer is suspended inside the Microphone using the Lyre system so as to minimize any external vibrations at the capsule level. Add this to the super high grade electronics and we end up with a mic that has been designed to have the lowest noise level of any studio mic available, measuring only 4.5 dBA of self-noise.

SMR EXTERNAL SHOCKMOUNT

Shockmount Mic Frame

The frame of the SMR is constructed from an engineering grade reinforced polymer, typically only seen in high-load applications such as safety equipment, automotive components, and military artillery. Vibration force is evenly distributed around the outer frame via the wide mounting rails, increasing the effectiveness of the Lyre system.

Dual Lyre system

The unique dual-Lyre suspension system of the SMR was developed by RØDE’s engineers to improve the overall effectiveness of the shock mount. The smaller inner Lyre acts as a tension element, to maintain each Lyre in its neutral position where it is most efficient at cancelling vibration.

SMR EXTERNAL SHOCKMOUNT

Microphone Pop Shield

No expense was spared in the creation of the SMR’s pop shield. Manufactured from medical-grade stainless steel, it is first chemically etched, shaped and welded before receiving a PVD base coat, followed by an electrostatically charged paint coating. Embedded between the outer panels is a silicon damper, further minimising any resonance that could affect your sound.

SPECIFICATIONS

Acoustic Principle Pressure Gradient
Active Electronics JFET impedance converter with bipolar output buffer
Capsule 1.00"
Address Type Side
Output impedance 100 Ω
Maximum SPL 132 dB SPL (@ 1 kHz, 1% THD into 1K Ω load)
Maximum Output Level 8.0 dBu (@ 1 kHz, 1% THD into 1K Ω load)
Equivalent Noise Level (A-weighted) 4 dB-A
Power Options +24 V phantom power / +48 V phantom power
Dimensions 187 mm x 50 mm x 50 mm ( H x W x D )
Output XLR Output
Warranty 1 year with free extension to 10 years following registration
Specifications
Specifications
Type Condenser
Polar Pattern (Direction) Cardioid
Impedance 100 ohms
Sensitivity -31.9dB re 1 Volt/Pascal (25.00mV @ 94 dB SPL) +/- 2 dB @ 1kHz
Frequency Response 20Hz - 20kHz
Wired / Wireless Wired
Connectors 1 x 3 Pin XLR
Weight 326 g
Including Shock Mount Yes
Including Pop Shield Yes
Including Mic Clip No
Powered By  
Warranty

Please note your statutory rights are not affected.

For further information regarding Scan's warranty procedure please see our terms and conditions

Details
Duration:
120 months
Type:
Direct
DOA Period:
30 days
RTB Period:
12 months
Manufacturer Contact Details
Manufacturer:
RODE

Additional Notes:
All RØDE Microphones are covered by a limited warranty for one (1) year from the date of purchase.This warranty can be extended to ten (10) years from the date of purchase. To be eligible for the extension of the warranty, the original purchaser must register the purchase of their RØDE Microphone online. The terms and conditions of the original warranty will then apply for the term of the extended warranty period.

For the RØDE M1 live dynamic microphone only, this warranty can be extended to the lifetime of the product from the date of purchase. To be eligible for the extension of the warranty, the original purchaser must register the purchase of their RØDE M1 live dynamic microphone Microphone online at www.rode.com. The terms and conditions of the original warranty will then apply for the term of the extended warranty period.

RØDE Microphones 5 Year Limited Replacement Warranty - Terms and Conditions All RØDE Microphones are covered by a limited warranty for one (1) year from the date of purchase.This warranty applies only to the RØDE HS1, RØDE Pin Mic and RØDE Lavalier microphones.This warranty can be extended to five (5) years from the date of purchase. To be eligible for the extension of the warranty, the original purchaser must register the purchase of their RØDE Microphone online at www.rode.com. The terms and conditions of the original warranty will then apply for the term of the extended warranty period.




Reviews
Questions & Answers
Rode NT1 KIT, Condenser Microphone,
Rode NT1 KIT, Condenser Microphone,