Scan code: LN76830 Manufacturer code: PROHBL4

HBL-4 Heat Blaster by Providence

Providence HBL-4 Heat Blaster High Gain Distortion Pedal

Thumbnail 1 : HBL-4 Heat Blaster by Providence Thumbnail 2 : HBL-4 Heat Blaster by Providence HBL-4 Heat Blaster by Providence : video thumbnail 1
Scan code: LN76830 Manufacturer code: PROHBL4
£145.00Item currently awaiting an ETA
Pre order
Free Delivery
From £13.02 / month (APR 14.9%)
Monthly Payment: £25.16
Instalment Rate: 14.9% p.a. (fixed)
Cost of purchase: £145.00
Total inc. interest: £150.97
Monthly Payment: £13.02
Instalment Rate: 14.9% p.a. (fixed)
Cost of purchase: £145.00
Total inc. interest: £156.20
If you are approved for a credit limit with PayPal Credit and use it for future purchases, the APR for those purchases won't be more than 17.9% and may be even lower.

Representative Example:

Purchase Rate: 17.9% p.a. (variable)

Representative: 17.9% APR (variable)

Assumed Credit Limit: £1,200

Subject to status. Terms and Conditions apply.
spend over £225 and Buy Now, Pay Later or spread the cost of your finance over 24-48 months with a 10% deposit.
Delivery Options
  • By DPD to your specified address. | Free Receive SMS with one-hour delivery window Weekend, timed and European delivery options are available at checkout

    Have your parcel delivered by DPD to your specified address. Receive SMS with one-hour delivery window

    Weekend, timed and European delivery options are available at checkout
  • Collect instore Collect from our Bolton store, BL6 6PE | Free

    Order online, collect from our Bolton store (25-28 Enterprise Park, Middlebrook, Horwich, Bolton, BL6 6PE)

  • UPS and DPD Pickup Pickup from local convenience store | £4.79

    Collect your parcel from your newsagents, petrol stations and convenience stores

ScanProtect
  • SCANPROTECT Protect against installation damage for 28 days. More info

    ScanProtect is an enhanced warranty specifically designed and offered by Scan to reduce the risk of any mishap or damage to components during installation.

    Our aim with ScanProtect is to encourage our customers to upgrade or build their own PC confidently. For a small additional fee our customers are provided with complete peace of mind.

Product Overview A powerful distortion sound close to the modern thick high gain tube amplifiers!

The Heat Blaster HBL-4 provides aggressive distortion from classic rock to modern hard rock.

A powerful high gain distortion
The new Heat Blaster HBL-4 became more powerful distortion pedal with rich harmonics.

Its edgy aggressive sound got closer to the high gain tube amp sound while retaining picking nuance vividly.

Bass Boost Switch
Boosts the low-frequency range. This function achieves extra low end impact with humbucking and single-coil pickups.
It's more helpful with single-coil pickups to create tight bottom sound.

Wide dynamic range
Internal circuitry doubles the 9-volt supply voltage to 18 volts, achieving wider dynamic range and more amp-like sound than conventional distortion effects.

S.C.T. Circuit
In a normal True-Bypass circuit, in bypass mode the audio signal passes through two switch contacts. But in the HBL-3, in bypass mode the audio passes through a single contact, thanks to a single contact true-bypass circuit. The result is much higher sound quality and reliability than that provided by previously existing products. The S.C.T. Circuit now makes it possible to further reduce any change or deterioration in sound quality and gives the feeling that the footswitch circuit is removed entirely from your signal chain.

D.C.G. Circuit
Due to the adoption of the new double-contact grounding circuit (D.C.G. Circuit), by inserting a monaural plug into the output jack, the shield (sleeve) of the plug provides two points of contact to the pedal's ground circuit. By increasing the area of the point of contact, it becomes more difficult for a loose connection to occur, and provides the additional advantage of improved sound quality.

Multi-function LED
In addition to indicating the pedal's on/off status, the HBL-4 LED provides effective visual battery power monitoring. When the battery voltage drops below 7 volts the LED will become dimmer and begin to go out. The effect will still operate at this voltage, but to ensure optimum performance the battery should be replaced as soon as possible.

More information can be found in the User Manual below:
Data Sheet Features • Controls: LEVEL, TONE, DRIVE, BASS BOOST
• Connectors: 1/4-inch phone jack x 2 (INPUT and OUTPUT), DC 9V input jack (AC adaptor jack)
• Power Supply: 9V battery or AC adaptor
• Power Consumption: DC 9V, 8 mA approx.
• Dimensions:115(D)×72(W)×50(H)mm
• Weight: 250 g approx. (Not including battery)
Warranty

Please note your statutory rights are not affected.

For further information regarding Scan's warranty procedure please see our terms and conditions

Details
Duration:
12 months
Type:
Return to base
DOA Period:
28 days
RTB Period:
1 months
Manufacturer Contact Details
Manufacturer:
SCAN
Reviews
Questions & Answers
HBL-4 Heat Blaster by Providence
HBL-4 Heat Blaster by Providence