Rated 4.8 out of 5 by 4
Rated 5 out of 5 by Keef49 Great Pump...Fear it
This a great pump, compact, very quiet, almost silent and vibration free. It has a 3pin connector for motherboard header and supports speed control, (no clunky Molex). Comes with an AV pad and two rubber bushed mounting brackets.
I ordered this to replace the one I have used since 2009 that died recently, after six and half years and in excess of 30,000 hours use. Can't be bad and for less that £30.00
08 February 2016
Rated 5 out of 5 by Patryk1996 Very good
Completely fine pump. More than enough for my 240 rad and CPU watercooling loop. One thing though: Phobya did not bother to include manual! The pump itself does NOT show inlet/outlet and when I was about to flush the system, I had it running dry for 3 seconds... then found out on forum that:
INLET (INTAKE) is the piece on the opposite of 3 pin cable and OUTLET is the piece on the top. Thought it's other way around ..
Apart from that, good.
13 March 2015
Rated 5 out of 5 by viktor2142 Almost silent pump!
This pump is cheap, quiet and efficient.
I cannot hear it in the back of my Air 540, on the supplied foam mount - so fitting it in another case for a silent solution would be fine too.
27 December 2014
Rated 4 out of 5 by Synovate Good pump for your first water cooling loop
This pump is ideal for your first water cooling loop. Made by the Germans, you know that you are getting a good quality product. I used this pump with my alphacool lighttower which enables you to mate the pump straight onto the res. This is a good space saver.
Even though it's quite loud for a pump, it is alot quieter than any air cooling equivalent. I will eventually be including a GPU in my loop and this will still be able to handle the flow perfectly!
06 October 2014