
(Open Box) Furman 10A Standard Power Conditioner, 230V
(Open Box) Furman - M-10X E 10A Standard Power Conditioner, 230V
Email me when the availability or price changes
(Open Box)
10A Standard Power Conditioner, 230V
Furman - M-10X E

Please note: This is an open box product, packaging has been opened and demonstrated to a customer, but product is in as-new condition.
PERFECT LOW-COST AC POWER SOLUTIONThe Furmnan A Merit Series Power Conditioner is the perfect low-cost AC power solution for any rack mount system. Install an M-10x E in to the top slot of your rack, and the ten switched outlets in the rear panel will power up and protect all your equipment up to a 10-amp load.
INSTRUMENT RIGSIf you’ve got a rack for your effects, preamps, tuner and you plug that into the wall, one big spike can cause your entire rig to go up in smoke. Furman’s standard level surge/spike protection defends your gear from the spikes and surges that are so common at gigs and practice spots. With standard level Furman RFI/EMI filtration, you’ll get a quieter tone without pops, crackles, and the local radio station coming out of your amp. Plus, dual pull-out lamps (M-10Lx E) let you see your rack without turning the house lights on.
RECORDINGWhen you can’t track down where that noise is coming from, or your mix sounding flat, the Furman standard level RFI/EMI filtration will lower the noise floor caused by the dirty AC power coming into your console or DAW. Furman’s standard level surge and spike protection keeps your sensitive digital equipment from acting funny or burning up due to everyday spikes and surges. With a 10A capacity and eleven total outlets, it’s enough to power your entire home studio.
DJ EQUIPMENTBars, clubs and other event venues have some of the worst power out there – from air compressors turning on and off to light shows pulling current loads up and down, the AC power can be a strain on the circuits in your rig. Furman’s standard level protection and filtration keeps the bad stuff out.
PRO AUDIOWhen you’re out there gigging, you never know what kind of power you’re going to get. The wear and tear on mobile rigs eventually takes it toll – which is why it’s smart to plug into Furman standard level protection and RFI/EMI filtration. It keeps your equipment safe and sounding clean. If you’re setting up a show at the local club or powering up the church band for their next service, make sure you give them power they can trust.
amazing features
• AC noise filtering to reduce radio frequency and electromagnetic interference (RFI/EMI)
• Spike & surge protection ensures equipment stays safe and your power stays clean
• Front panel indicator LED lets you know that your equipment is being protected
• 10 rear panel outlets and 1 front panel convenience outlet
• 10 amp rating, with circuit breaker
The Tech Spec
Features | Specification | Type | Merit Series 240V Power Conditioner |
---|---|
Line Voltage | 240 Volts |
Model Number | M-10X E |