SAPPHIRE NITRO+ Radeon RX 470 Graphics Card
This is a mid-ranged RX 470 customized by SAPPHIRE. Built on Polaris architecture this Radeon 470 card features increased cache and native asynchronous shaders for unmatched efficiency in DirectX12, among other impressive technology. As part of SAPPHIRE’s NITRO+ series this RX 470 card comes equipped with 2048 GCN based stream processors and 256-bit memory interface. A custom design brings enhanced cooling to keep the 470 card cool and efficient when under pressure.
NITRO BOOST RX 470 POWER
Unlock the Potential of SAPPHIRE RX 470
Embedded into this SAPPHIRE 470 graphics card is their new NITRO Boost switch that increases the boost clock and power limit for higher performance, to unleash the gaming performance of the card. Planning to overclock or looking for maximum performance? SAPPHIRE NITRO 470 cards come with an 8 pin power connector to plug in and enable Nitro Boost.
SAPPHIRE DUAL-X GPU COOLING
Longer Lasting, Noise Reduced GPU Fans
SAPPHIRE's acclaimed Dual-X Cooling is powered by two massive yet silent fans and state-of-the-art radiator design. The new form of our 95mm blades mean greater airflow and superior heatsink coverage for the RX 470 graphics card, at lower noise levels compared to standard cooling designs. These feature dual ball bearing fans, which have an 85% longer lifespan than sleeve bearings in our tests.
NITRO GRAPHICS CARD COOLTECH
Intellegent 470 Fan Control
With the SAPPHIRE NITRO Gaming Series cards’ intelligent Fan Control III, the fans on the 470 card starts precisely at 52 degrees Celsius to smartly balance performance against fan noise.
ENHANCED GPU COOLING SYSTEM
Redesigned RX 470 Airflow
After finding the traditional axial fan design was resulting in a higher temperature build up over time SAPPHIRE are now utlizing NITRO Free Flow. With the RX 470’s NITRO Free Flow (NFF) SAPPHIRE redesigned the airflow of the entire cooler and board, so that the hot air is expelled through the system fan instead, rapidly dissipating heat from the 470 GPU card.
NITRO 470 QUICK CONNECT TECH
Easily Upgrade and Clean GPU Fans
If there’s a fan problem with this RX 470 from SAPPHIRE, you don’t have to return the entire card – SAPPHIRE or their channel partners will send out a replacement fan directly to you! All the SAPPHIRE NITRO + Radeon RX480 and RX470 fans use this Quick Connect system. That means they’re easy to remove, clean and replace, with just one screw holding them securely in place.
VR FRIENDLY GPU
Easy Setup for Virtual Reality Gaming
The SAPPHIRE NITRORX 470 gaming series cards come with Dual HDMI ports, specifically designed to work with VR. By having two HDMI ports, you can have both an HD monitor and cutting-edge VR headset running at the same time.
NITRO GLOW GRAPHICS CARD LED
Stylish RX 470, Give it a Glow
This RX 470 SAPPHIRE graphics card is more than another component; it’s the beating heart of your gaming system. It should look as good as it performs. With tasteful shroud design augmented by RGB LEDs, each card is practically a piece of art. You can even change the colours of the LED, for your own customized GPU design. This can be controlled via software using the latest version of SAPPHIRE’s award winning overclocking utility – TriXX 3.0, or through hardware by pressing the red button on the back of your SAPPHIRE NITRO 470 gaming series card. Users can choose from a set of five different modes including Fan Speed Mode, PCB Temperature Mode or the colourful rainbow mode. If you prefer, LEDs can also be turned off.
NITRO RX 470 CONNECTIONS
2 x DisplayPort 1.4 | 1 x DVI-D DL | 2 x HDMI 2.0b